ISO 17353:2004
Water quality — Determination of selected organotin compounds — Gas chromatographic method
Water quality — Determination of selected organotin compounds — Gas chromatographic method
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 31
- Дата публикации:
- 17 сентября 2004 г.
- Издание:
- ISO IS 17353 edition 1 version 1
- ICS:
- 13.060.50
ISO 17353:2004 specifies a method for the identification and quantification of monobutyltin, dibutyltin, tributyltin, tetrabutyltin, monooctyltin, dioctyltin, triphenyltin, tricyclohexyltin compounds and/or cations in drinking water, surface water and wastewater containing not more than 2 g/l of suspended material. The working range is 10 ng/l to 1 000 ng/l. The respective anions are not determined. This method can also be applicable to other compounds such as monomethyltin, dimethyltin, monophenyltin and diphenyltin compounds and/or cations. ISO 17353:2004 is also applicable to marine water.
Abstract
Overview
ISO 17353:2004 - "Water quality - Determination of selected organotin compounds - Gas chromatographic method" specifies a validated laboratory procedure for the identification and quantification of selected organotin compounds in drinking water, surface water, wastewater and marine water. The method covers targeted organotins (MBT, DBT, TBT, TTBT, MOT, DOT, TPhT, TCyT) and is extendable to other alkyl/aryl organotins. The working range is 10 ng/L to 1 000 ng/L, and samples may contain up to 2 g/L suspended material. The standard uses derivatization and capillary gas chromatography with organotin‑specific detection.
Key topics and technical requirements
- Sample matrices: drinking water, surface water, wastewater, marine water (suspended solids ≤ 2 g/L).
- Analytes: monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TTBT), monooctyltin (MOT), dioctyltin (DOT), triphenyltin (TPhT), tricyclohexyltin (TCyT); method can also apply to other mono/di‑substituted organotins.
- Preparation: alkylation (derivatization) with sodium tetraethylborate, followed by liquid–liquid extraction (hexane), optional silica clean‑up and concentration.
- Separation & detection: capillary gas chromatography; compatible detectors include GC–MS, flame photometric detector (FPD), atomic emission detector (AED).
- Calibration & quantification: calibration of the full procedure using internal standards and multicomponent stock/spiking solutions; recommended preparation and stability conditions are specified.
- Working range & sensitivity: validated for 10–1 000 ng/L; blanks and reagent purity must be checked due to potential organotin contamination.
- Quality & safety: use Grade 1 water (ISO 3696), follow sampling guidance (ISO 5667 series) and standard laboratory safety practices.
Applications and users
ISO 17353:2004 is intended for:
- Environmental and analytical chemistry laboratories performing organotin monitoring.
- Water utilities and regulatory agencies assessing water quality and compliance.
- Research groups studying organotin contamination in freshwater, wastewater and marine environments.
- Marine monitoring programs where organotin compounds (e.g., TBT) are of regulatory or ecological concern.
Practical uses include routine monitoring, incident investigation, effluent testing, and research on bioaccumulation and environmental fate.
Related standards
- ISO 3696:1987 - Water for analytical laboratory use
- ISO 5667-1 / ISO 5667-2 / ISO 5667-3 - Water quality - Sampling guidance
- Prepared under ISO/TC 147 (Water quality)
Keywords: ISO 17353:2004, organotin, water quality, gas chromatographic method, GC‑MS, sodium tetraethylborate, tributyltin (TBT), environmental monitoring, drinking water, wastewater, marine water.
Технические детали
- Технический комитет
- ISO/TC 147/SC 2 - Physical, chemical and biochemical methods
- SKU
- ISO 17353:2004
Похожие стандарты
Стандарты, упомянутые в описании
ISO 3696:1987
ДействующийWater for analytical laboratory use — Specification and test methods
Overview ISO 3696:1987 is an international standard established by the International Organization for Standardization (ISO) that specifies the requirements and test methods for water used in analytic…
BS EN ISO 3696:1995
ДействующийWater for analytical laboratory use. Specification and test methods.
ISO 5667-18:2001
ОтменёнWater quality — Sampling — Part 18: Guidance on sampling of groundwater at contaminated sites
ISO 5667-21:2010
ДействующийWater quality — Sampling — Part 21: Guidance on sampling of drinking water distributed by tankers or means ot…
Overview ISO 5667-21:2010 - Water quality - Sampling - Part 21 provides guidance for sampling drinking water that is distributed by tankers or by means other than contiguous piped distribution system…