ISO 18613:2014

Overview

ISO 18613:2014 - Pallets for materials handling - Repair of flat wooden pallets defines the defects that make a flat wooden pallet unacceptable for reuse and establishes minimum repair criteria for pallets repaired with wood‑based components. The standard is focused on safety and longevity of repaired pallets, helping organizations maximize reuse, ensure worker and goods safety, and meet quality expectations for repaired flat wooden pallets.

Key topics and technical requirements

• Scope and applicability: Applies to wooden flat pallets repaired using wood‑based components. Pool/rental pallet repair may be subject to owner/operator rules.
• Overriding safety criterion: Any pallet unsafe to handle or likely to endanger people or goods is unacceptable.
• Inspection: Pallets must be inspected before any handling (loaded or empty).
• Unacceptable conditions (examples):
  • Missing or broken deckboard, block, stringer or stringerboard
  • Missing wood exposing two or more nail shanks on a deckboard (or one or more shanks on more than two deckboards)
  • Splits > 1/2 board width or length that cannot be securely nailed
  • Decay affecting mechanical properties or contamination of unknown nature
  • Full‑width splits in stringer notches
• Repair requirements:
  • Remove unacceptable components and replace with one‑piece new or re‑used components that meet the relevant specifications
  • Nail joint strength is critical; nail penetration into block/stringer shall be at least 35 mm
  • Nail placement: repeat original pattern; nails no closer than 15 mm from ends/edges; clinch if required (clinched clinch = 10 mm)
  • Full‑width splits in notched stringers (partial 4‑way pallets) repaired with metal plates per Annex E
• Dimensional and component tolerances (for pallets of unknown specification):
  • Length/width tolerance: ±8 mm; overall height ±10 mm; flatness within 10 mm (see Table 1)
  • Component tolerances for thickness, width and lengths (see Table 2)
• Marking and phytosanitary: Repaired pallets shall be marked as required (pool mark, ID fastener) and reference ISPM 15 for treatments/marking.
• Recycling/disposal: Pallets that cannot be repaired according to ISO 18613 should be discarded or recycled.

Practical applications and users

ISO 18613 is used by:

• Pallet repair businesses and workshops
• Logistics and supply‑chain managers controlling pallet quality and safety
• Pool and rental pallet operators (in conjunction with their own rules)
• Quality inspectors and auditors in warehousing and distribution
• Waste‑management and recycling operations handling wooden pallets

Benefits include standardized inspection and repair practices, improved safety, predictable load performance, and extended service life of wooden pallets.

Related standards

• ISO 15629 - Quality of fasteners for assembly and repair of flat wooden pallets
• ISO 18333 - Quality of new wooden components for flat pallets
• ISO 18334 - Quality of assembly of new wooden pallets
• ISPM 15 - Phytosanitary measures for wood packaging materials

Keywords: ISO 18613, pallet repair, flat wooden pallets, pallet inspection, nail joint strength, pallet recycling, wooden pallet repair, pallet marking.