ISO 20163:2019

Overview

ISO 20163:2019 - "Vulcanized rubber - Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)" specifies chromatographic methods to quantify the inorganic free sulfur (Sx) remaining after rubber vulcanization. The standard defines sample extraction, derivatization, chromatographic analysis (GC and HPLC) and calibration approaches for comparing free sulfur content across vulcanized rubber samples.

Key topics and requirements

• Scope and principle
  • Targets inorganic free sulfur not consumed during curing; residual sulfur in curing agents is excluded.
  • Free sulfur is derivatized by reaction with triphenylphosphine (TPP) to form triphenylphosphine sulfide (TPPS) for improved detectability.
• Sample preparation
  • Extraction follows ISO 1407:2011 (Method B). Typical test-piece mass and handling are specified (example: 4 g test piece), evaporation and dilution steps, filtration and possible SPE purification.
  • TPP is added in excess to ensure complete derivatization; samples are prepared in tetrahydrofuran (THF).
• Chromatographic methods
  • Method A (GC): GC-MS or GC-FID detection; recommended capillary column (5% diphenyl-dimethylpolysiloxane), injector and transfer-line temperature settings, carrier gas flow (e.g., helium) and suggested oven program. Typical injected volume: 1 µl. Example retention times: TPP ~12.75 min, TPPS ~16.10 min.
  • Method B (HPLC/UV): HPLC with UV detection (wavelength 260 nm), C18-type column example, gradient elution using ammonium acetate buffer (pH 6.7) and acetonitrile, flow ~1 ml/min. Typical injected volume: 20 µl.
• Calibration and quantification
  • Standard addition is the preferred calibration method to correct matrix effects and unknown sample matrices.
  • External calibration can be used when matrix effects are absent.
  • Calibration ranges and injected volumes are described and should be adapted to required quantification limits.
• Quality and reporting
  • Requirements include duplicated testing, precision assessment, and content for the test report (see Clauses 10–12 and informative annexes with chromatogram examples and precision data).

Applications and users

• Practical uses:
  • Comparative measurement of free sulfur to evaluate vulcanization completeness.
  • Quality control and batch-to-batch comparison for rubber manufacturers and compounders.
  • R&D, failure analysis and forensic testing where residual sulfur affects properties or stability.
• Primary users:
  • Analytical laboratories, rubber quality/control teams, materials scientists, regulatory and certification bodies involved in rubber testing.

Related standards

• ISO 1407:2011 - Rubber - Determination of solvent extract (referenced for extraction procedure).

Keywords: ISO 20163:2019, vulcanized rubber, free sulfur, gas chromatography (GC), high performance liquid chromatography (HPLC), triphenylphosphine (TPP), triphenylphosphine sulfide (TPPS), chromatographic methods, rubber testing.