ISO 22863-3:2020

Overview

ISO 22863-3:2020 specifies a validated laboratory method to determine lead and lead compounds in pyrotechnic compositions (fireworks) using flame atomic absorption spectrophotometry (flame AAS). The method has a minimum detection limit of 10 mg/kg and includes sample digestion, calibration, measurement and calculation procedures. A simple preliminary qualitative test is recommended to decide whether a full quantitative analysis is required.

Key topics and technical requirements

• Scope: Quantitative determination of lead in fireworks matrices by flame AAS (minimum detection limit 10 mg/kg).
• Sample preparation: Typical sample mass 1.0 g (duplicate analyses); a 0.5 g sample protocol is defined for the standard addition method.
• Digestion chemistry: Acid digestion with hydrochloric, nitric, perchloric and (for Ti-containing samples) hydrofluoric acid. A mixed acid (4 parts HNO3 : 1 part HClO4) is used prior to microwave digestion.
• Microwave digestion: PTFE vessels in a microwave oven; reference conditions shown (e.g. 1 000 W, ramp to 210 °C, 30 min hold) - follow manufacturer guidance.
• Instrumental measurement: Flame AAS with a lead hollow‑cathode lamp. Reference spectrometer settings are provided (e.g. wavelength 283.3 nm, slit 0.5 nm, recommended gas flows).
• Calibration: External calibration series prepared from a lead standard diluted to 0; 0.5; 1.0; 2.0; 5.0; 10.0 µg/ml.
• Quality control: Blank correction in parallel; duplicate results must agree within ±10% of their mean. If outside limits, re-test (increase sample mass if needed).
• Calculations & reporting: Lead content calculated from measured concentration, blank correction, solution volume, dilution factor and sample mass. Test report must reference ISO 22863-3:2020 and include sample description, lab ID, results and any anomalies.

Practical applications and users

This standard is directly applicable for:

• Testing laboratories performing routine chemical analysis of fireworks and pyrotechnic products.
• Manufacturers and quality control teams ensuring product safety and conformity with lead content limits.
• Regulatory bodies, customs and safety inspectors verifying compliance and investigating hazardous consignments.
• Forensic and incident investigators analyzing pyrotechnic residues for lead contamination.

Benefits include reliable, reproducible lead quantification, guidance on matrix effects (standard addition), and clear reporting/quality requirements.

Related standards

• ISO 22863-1:2020 - Fireworks - Test methods - Part 1: General (sample preparation and general procedures).
• Other parts of the ISO 22863 series cover additional targeted substances and methods.

Keywords: ISO 22863-3:2020, fireworks testing, lead determination, flame atomic absorption, atomic absorption spectrophotometry, microwave digestion, pyrotechnic compositions, lead compounds, calibration curve, detection limit 10 mg/kg.