ISO 2909:2002

Overview

ISO 2909:2002 - Petroleum products - Calculation of viscosity index from kinematic viscosity - defines standard procedures to calculate the viscosity index (VI) of petroleum products and related materials (for example, lubricating oils) from measured kinematic viscosities at 40 °C and 100 °C. The standard gives two calculation routes (Procedure A and Procedure B), instructs on use of tabulated reference values and equations, and sets rules for reporting and precision.

Key topics and requirements

• Input data: kinematic viscosity at 40 °C (U) and 100 °C (Y) determined in accordance with ISO 3104.
• Scope limits:
  • Not applicable when kinematic viscosity at 100 °C is less than 2.0 mm2/s.
  • Table-based values in ISO 2909 cover 2.0 to 70.0 mm2/s at 100 °C; equations are provided for higher viscosities.
• Two procedures:
  • Procedure A (VI ≤ 100): obtain L and H (reference kinematic viscosities at 40 °C for VI = 0 and VI = 100 respectively) from Table 1 (interpolate if needed) or use the standard’s equations when Y > 70 mm2/s. Calculate VI using:
    • VI = (L − U) / (L − H) × 100
  • Procedure B (VI ≥ 100): obtain H from Table 1 (or equation if Y > 70 mm2/s), compute exponent n from logarithms of H, U and Y, then calculate VI using the standard’s logarithmic formula (clause 6.3.4).
• Rounding and expression: report VI to the nearest whole number; if exactly halfway, round to the nearest even integer (e.g., 115.5 → 116).
• Precision: the VI calculation itself is exact; overall precision depends on the repeatability/reproducibility of the two kinematic viscosity measurements (precision guidance references ISO 3104 and precision tables in ISO 2909).

Practical applications and users

• Quality control and acceptance testing in petroleum refining, lubricant manufacturing, and formulation.
• Laboratory technicians and test houses performing viscosity characterization and specifications.
• Product engineers, procurement and specification writers who need a standardized VI value for performance comparisons, storage, and cold-start behavior assessments.
• Regulatory, standards and R&D teams that require traceable, ISO-aligned VI calculations for product datasheets and specifications.

Related standards

• ISO 3104 - Determination of kinematic viscosity (referenced normative standard; required for measuring U and Y).
• ISO 2909 is commonly used alongside internal test methods and other lubricant/petroleum product standards for product specification and performance assessment.

Keywords: ISO 2909:2002, viscosity index, kinematic viscosity, petroleum products, lubricating oils, calculation, ISO 3104, Procedure A, Procedure B, Table 1.