ISO 2962:2010

Overview

ISO 2962:2010 - "Cheese and processed cheese products - Determination of total phosphorus content - Molecular absorption spectrometric method" specifies a validated spectrometric procedure for measuring total phosphorus in all types of cheese and processed cheese. The method uses wet mineralization followed by formation of a molybdenum blue complex and molecular absorption measurement at 820 nm. Results are reported as a percentage of total phosphorus (expressed to two decimals).

Key topics and technical requirements

• Scope: Applicable to all kinds of cheese and processed cheese products.
• Principle: Wet digestion (concentrated sulfuric acid + hydrogen peroxide) to mineralize the sample, reaction with sodium molybdate/ascorbic acid to produce a blue molybdenum complex, and absorbance measurement at 820 nm by a spectrometer.
• Sample preparation: Remove rind, homogenize (grind or grate) and take a representative test portion (typically 0.5–1.0 g depending on moisture content).
• Reagents: Analytical-grade sulfuric acid, ~30% hydrogen peroxide, sodium molybdate solution, freshly prepared ascorbic acid reagent, and a phosphate standard (prepared from dried potassium dihydrogen phosphate).
• Apparatus: Clean phosphorus‑free glassware, Kjeldahl or attack flasks (≈25 mL), 10 mm pathlength cuvettes, spectrometer capable of 820 nm, water baths for digestion and color development.
• Procedure highlights: Digest until colorless, dilute to volume, aliquot and add molybdate–ascorbic reagent, heat in a boiling water bath ~15 minutes, cool and measure absorbance within 1 hour.
• Calibration & blank: Use a multi‑point calibration curve from phosphate standards (e.g., 0–50 µg P equivalents) and run a procedural blank.
• Calculation & reporting: Convert measured phosphorus (from the calibration) to % total phosphorus in the original sample; report results with two decimals.
• Performance: Stated repeatability and reproducibility limits (precision figures provided in the standard).

Applications and who uses it

• Dairy quality-control laboratories: routine monitoring of nutrient labeling and formulation control.
• Food manufacturers & process development teams: recipe development and verification for cheeses and processed cheese products.
• Regulatory & inspection bodies: compliance testing for nutrition labeling and food safety audits.
• Research laboratories: compositional studies, mineral nutrition research, and method validation.

Keywords: ISO 2962:2010, total phosphorus, cheese analysis, molecular absorption spectrometric method, molybdenum blue, spectrophotometry, phosphorus determination, sample digestion, dairy laboratories.

Related standards

• ISO 707 | FIL 50 - Sampling guidelines for milk and dairy products
• ISO 648, ISO 835, ISO 1042, ISO 4788 - laboratory glassware and pipette standards referenced for apparatus and measuring devices

For implementation, consult the full ISO 2962:2010 document for complete reagent recipes, exact volumes, safety notes and the formal calculation/precision data.