ISO 3759:2011

Name: ISO 3759:2011 — Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
SKU: ISO 3759:2011
Price: 25 EUR
Availability: InStock

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

Название (английский):

ISO 3759:2011

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 13 мая 2011 г.
Издание:: ISO IS 3759 edition 5 version 1
ICS:: 59.080.30

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO 3759:2011 specifies a method for the preparation, marking and measuring of textile fabrics, garments and fabric assemblies for use in tests for assessing dimensional change after a specified treatment, e.g. washing, dry cleaning, soaking in water and steaming, following the procedures in ISO 3005, ISO 7771, ISO 6330, ISO 3175 or ISO 15797. ISO 3759:2011 is applicable to woven and knitted fabrics and made-up textile articles. The procedures are not applicable to certain upholstery coverings.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 3759:2011 - Textiles: Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change - specifies how to prepare, mark and measure textile fabrics, garments and fabric assemblies for dimensional change testing. It applies to woven and knitted fabrics and made-up textile articles (excluding certain upholstery coverings) and is used in conjunction with treatment procedures such as washing, dry‑cleaning, steaming or industrial finishing. The standard ensures consistent, reproducible measurements of shrinkage or extension after specified treatments.

Key topics and requirements

Scope and applicability: Applies to woven and knitted fabrics and made‑up articles; not intended for some upholstery coverings. Used with ISO 3005, ISO 7771, ISO 6330, ISO 3175 or ISO 15797 treatment methods.

Specimen selection and dimensions: Cut representative specimens (minimum 500 × 500 mm); for narrow fabrics full‑width specimens may be used. Avoid cutting within 1 m of roll ends.

Conditioning and atmosphere: Condition specimens/garments in the standard atmosphere per ISO 139 until constant mass (no mass change > 0.25 % over 1 h intervals).

Marking and measuring:

Make at least three pairs of reference marks in both length and width; each pair separated by at least 350 mm and not less than 50 mm from edges.
Use indelible ink, sewn threads, heated wire or staples (as appropriate) for marking.
Measure with a ruler, flexible steel ruler or glass‑fibre tape (millimetre graduation) to an accuracy of 1 mm. Glass‑fibre tapes should be verified at least every 6 months.

Garment measurement positions: Defines standard measuring points for jacket‑like garments, trousers, skirts and one‑piece articles (e.g., neckband length, centre‑back length, waist width, inside leg).

Treatment and result expression: Subject specimens to the agreed test (washing, dry‑cleaning, steam, industrial finish), re‑measure, and calculate percentage change using the standard formula; record plus for extension and minus for shrinkage.

Test report: Must reference ISO 3759:2011 and include article description, measuring positions, treatment details and results.

Applications and who uses it

ISO 3759 is essential for:

Textile laboratories performing dimensional change testing

Apparel manufacturers and quality assurance teams validating garment sizing stability after washing or finishing

Fabric producers assessing fabric behavior during consumer or industrial laundering

Product compliance and R&D teams comparing materials and finishes

Use cases include domestic washing tests, professional cleaning validation, industrial laundering of workwear and quality control for garment shrinkage claims.

Related standards

ISO 139 - Standard atmospheres for conditioning and testing

ISO 3005, ISO 7771, ISO 6330, ISO 3175, ISO 15797 - Treatment/procedure standards for washing, steaming, dry‑cleaning and industrial finishing

ISO 22198 - Determination of width and length of fabrics

Keywords: ISO 3759, dimensional change, textile testing, fabric specimens, garment measurement, specimen marking, conditioning atmosphere, shrinkage testing.

ISO 3759:2011

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and who uses it

Related standards

Технические детали

ISO 3005:1978

Textiles — Determination of dimensional change of fabrics induced by free-steam

ISO 777:1982

Pulps — Determination of calcium content — EDTA titrimetric and flame atomic absorption spectrometric methods

ISO 6330:2012

Textiles — Domestic washing and drying procedures for textile testing

ISO 3175-1:2010

Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1: Assessment of per…

BS EN ISO 15797:2018

Textiles. Industrial washing and finishing procedures for testing of workwear.

ISO 13926-1:2018

Pen systems — Part 1: Glass cylinders for pen-injectors for medical use

BS EN ISO 3759:2011

Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of d…

ISO 22198:2006

Textiles — Fabrics — Determination of width and length