ISO 6537:1982

Name: ISO 6537:1982 — Pneumatic fluid power systems — Cylinder barrels — Requirements for non-ferrous metallic tubes
SKU: ISO 6537:1982
Price: 25 EUR
Availability: InStock

Pneumatic fluid power systems — Cylinder barrels — Requirements for non-ferrous metallic tubes

Название (английский):

ISO 6537:1982

Pneumatic fluid power systems — Cylinder barrels — Requirements for non-ferrous metallic tubes

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 1 декабря 1982 г.
Издание:: ISO IS 6537 edition 1 version 1
ICS:: 23.100.20

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

Covers non-ferrous metallic pneumatic cylinder tubes. Defines the mechanical properties, dimensional tolerances, surface finishes, and technical delivery conditions of the following tubes and bores for pneumatic fluid power cylinders: round non-ferrous metallic tubes, seamless or welded type, in the as-drawn stress-relieved or fully heat-treated condition; bores, specially finished, with or without metal removal. Annex A specifies the dimensions and tolerances on inside diameters, annex B provides a recommended method of ordering.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 6537:1982 specifies requirements for non‑ferrous metallic pneumatic cylinder tubes (cylinder barrels) used in pneumatic fluid power systems. The standard covers round tubes (seamless or welded) in the as‑drawn stress‑relieved or fully heat‑treated condition, and bores with special finishing (with or without metal removal). It defines mechanical properties, dimensional tolerances, surface finishes and technical delivery conditions for tubes intended as pneumatic cylinder bodies. Annex A gives inside‑diameter dimensions and tolerances; Annex B provides a recommended method of ordering.

Key topics and technical requirements

Materials: Brass and aluminium are the metals explicitly retained in the standard (other non‑ferrous metals may be suitable by agreement).

Manufacture and condition: Tubes may be supplied as-drawn & stress‑relieved, fully heat‑treated, or with special finishing for welded tubes.

Mechanical and chemical properties: Alloy, metallurgical state or agreed mechanical/chemical property values must be defined by tube and cylinder manufacturers.

Dimensional tolerances:

Inside‑diameter tolerance classes conform to ISO 286 (H11, H12, H13, H14).
Wall thickness tolerances and allowable eccentricity are defined (see standard tables).
If both inside and outside diameters are specified, outside diameter tolerance must ensure required wall thickness across the length.

Rectitude (straightness):

Measured against a 1 006 mm straight edge or by rolling on two rollers; specific limits depend on tube length (for lengths >1 000 mm, deviation must not exceed L/1 000).

Surface finish:

Bore surface roughness specified in terms of Ra and Rmax (ISO 468). Measurements are taken at multiple circumferential points; special finishing methods are defined for bores requiring tighter finishes.

Operating limits:

Recommended maximum normal working pressure generally limited to 25 bar (standard nominal pressures: 6.3, 10, 16, 25 bar).
Service temperature range to be covered by manufacturer at minimum −40 °C to +100 °C.

Delivery, packaging and inspection:

Protection and packaging by agreement; test certificates are supplied only if requested. Annex B lists the ordering information items.

Practical applications and users

ISO 6537 is intended for:

Pneumatic cylinder manufacturers and designers specifying cylinder barrels.

Tube producers and suppliers of aluminium and brass tubes for pneumatics.

Procurement and quality engineers setting purchase specifications and inspection criteria.

Design engineers ensuring compatibility of bore finish, tolerances and operating pressure/temperature.

Using ISO 6537 helps ensure interchangeability, reliable cylinder performance and reduced rework when integrating non‑ferrous tubes into pneumatic systems.

ISO 6537:1982

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

ISO 2867:2011

Earth-moving machinery — Access systems

ISO 4683-2:1999

Raw sheep skins — Part 2: Designation and presentation

ISO 3322:1985

Fluid power systems and components — Cylinders — Nominal pressures

ISO 5598:2008

Fluid power systems and components — Vocabulary

ISO 4602:2010

Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft