ISO 6594:2006

Name: ISO 6594:2006 — Cast iron drainage pipes and fittings — Spigot series
SKU: ISO 6594:2006
Price: 25 EUR
Availability: InStock

Cast iron drainage pipes and fittings — Spigot series

Название (английский):

ISO 6594:2006

Cast iron drainage pipes and fittings — Spigot series

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 18
Дата публикации:: 17 марта 2006 г.
Издание:: ISO IS 6594 edition 2 version 1
ICS:: 77.140.75

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO 6594:2006 specifies the characteristics of cast iron drainage pipes and fittings used for the installation of discharge pipes for waste and sewage, rain water pipe systems, and ventilation pipe systems. The technical specification is applicable to the range of nominal sizes, DN: 40 - 50 - 70 - 75 - 100 - 125 - 150 - 200 - 250 - 300 - 400 - 500 - 600. In addition, ISO 6594:2006 gives the dimensions for the most commonly used pipe and fitting sizes. It also provides control testing and test methods for checking compliance with the technical specification and the dimensional and other requirements.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 6594:2006 - Cast iron drainage pipes and fittings - Spigot series - specifies the technical characteristics, dimensions and test methods for cast iron drainage systems used for waste and sewage discharge, rainwater downpipes and ventilation pipe systems. The standard covers the spigot (plain-end) series for a defined range of nominal sizes (DN 40, 50, 70, 75, 100, 125, 150, 200, 250, 300, 400, 500 and 600) and includes dimensional tables, coating and marking requirements, and control testing procedures.

Key topics and technical requirements

Scope and application: Products covered are for gravity discharge pipelines (wastewater, sewage, rainwater and ventilation) and are intended for the listed nominal sizes (DN 40–600).

Type of ends and jointing: Pipes and fittings are the spigot type (without sockets); joint characteristics and tolerances are to be defined in national standards or manufacturer catalogues. Minimum free end lengths are specified to ensure satisfactory assembly.

Material quality: Cast iron grade must be at least 150 (per ISO 185) with phosphorus content < 0.9 %.

Dimensions and tolerances: The standard gives external diameters, wall thicknesses, lengths and angular tolerances for bends and branches (angle tolerance ±2°; many fitting linear tolerances ±5 mm). Nominal and minimum thicknesses and common fitting dimensions are specified for typical sizes.

Mass tolerances: Negative mass tolerance (if shown in catalogues) is −15 % for pipes and fittings; positive deviation is acceptable if all other requirements are met.

Coatings and protection: Internal and external coatings are required by default; coatings must dry rapidly, adhere well, resist chipping and be suitable for transport and storage. External coatings should accept finish coatings.

Marking: Durable manufacturer mark and nominal diameter at least once per metre of pipe length; fittings should be marked where possible.

Testing and quality control: Includes tests for castings, coated products, quality control procedures and certification to check compliance with dimensional and material requirements.

Applications and users

Cast iron pipe and fitting manufacturers for design, production and certification.

Municipal engineers, plumbing and drainage designers, and specifiers when selecting drainage systems for buildings and civil works.

Contractors and installers for procurement and installation guidance of spigot-series drainage systems.

Testing laboratories and conformity assessors to apply the specified control tests and issue compliance certificates.

Typical applications: building drainage, sanitary sewer connections, stormwater downpipes and ventilation stacks where cast iron, gravity-fed piping is specified.

ISO 6594:2006

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 18582-1:2016

Fluid power — Specification of reference dictionary — Part 1: General overview on organization and structure

ISO 8212:1986

Soaps and detergents — Techniques of sampling during manufacture

ISO 20662:2020

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 3021:2023

Adventure tourism — Hiking and trekking activities — Requirements and recommendations

ISO 3826-2:2008

Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…

ISO/IEC 24730-1:2014

Information technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)

ISO 8668-5:1992

Aircraft — Terminal junction systems — Part 5: Detail specification for type 3 system

ISO 7574-3:1985

Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and e…