ISO 7627-1:1983

Name: ISO 7627-1:1983 — Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 1: General requirements
SKU: ISO 7627-1:1983
Price: 25 EUR
Availability: InStock

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 1: General requirements

Название (английский):

ISO 7627-1:1983

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 1: General requirements

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 2
Дата публикации:: 1 октября 1983 г.
Издание:: ISO IS 7627 edition 1 version 1
ICS:: 77.160

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

Subsequent parts of ISO 7627 specify methods for determination of the content of a number of elements (see the table). The method is applicable to cabides of chromium, niobium, tantalum, titanium, tungsten, vanadium, mixtures of these carbides and binder metals, all grades of presintered or sintered hardmetals, produced from these cabides, and coated hardmetals, after total removal of coating, with the elements shown in the table.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 7627-1:1983 specifies the general requirements for chemical analysis of hardmetals using flame atomic absorption spectrometry (AAS). This Part 1 defines the field of application, fundamental principles, sampling guidance, reagent and apparatus expectations, and reporting conventions that ensure reproducible, accurate elemental analysis for quality assurance and process control.

The method covers total dissolution of a test portion followed by determination by flame AAS. Subsequent parts of ISO 7627 give element-specific methods and concentration ranges.

Key Topics

Field of application: Applicable to carbides of chromium, niobium, tantalum, titanium, tungsten and vanadium; mixtures of these carbides with binder metals; all grades of presintered or sintered hardmetals; and coated hardmetals after total removal of coating.

Principle: Dissolution of a test portion and measurement by flame atomic absorption spectrometry.

Interferences: Minimized by using matrix-matched test and calibration solutions to reduce matrix effects from elements present in the sample.

Reagents: Use analytical-grade reagents and double-distilled water (or equivalent purity); higher-purity reagents where necessary.

Apparatus: Ordinary laboratory glassware plus AAS equipment. Single-element hollow-cathode lamps are recommended. Measurement parameters should be selected to optimize sensitivity.

Sampling & sample prep:

Crush samples in a mortar made of a material that does not alter composition when necessary.
Extract any lubricants before analysis.
Perform the analysis on at least three test portions to obtain representative results.

Reporting: Test reports shall reference the standard and include sample identification, arithmetic mean of results, any deviations from the standard procedure, and details of occurrences that may have affected results.

Example element ranges (specified in subsequent parts):

Ca, K, Mg, Na: 0.001 to 0.02 %

Co, Fe, Mn, Ni: 0.01 to 0.5 %

Mo, Ti, V: 0.01 to 0.5 %

Ni, Ti, V: 0.5 to 2 %

Cr: 0.01 to 2 %

(Note: element-specific procedures and recommended instrument settings are provided in the relevant Parts of ISO 7627.)

Applications

ISO 7627-1:1983 provides a standardized foundation for laboratories and manufacturers performing chemical analysis of hardmetals. Typical uses include:

Quality assurance of hardmetal batches and finished parts

Process control during powder metallurgy and sintering operations

Incoming material inspection for carbides and binder metals

Regulatory and conformity testing where reproducible elemental data are required

Adhering to the general requirements reduces inter-lab variability and improves confidence in AAS-based determinations.

Related Standards

Subsequent Parts of ISO 7627: element-specific methods and instrument settings (see table in ISO 7627 series).

ISO/TC 119 (Powder metallurgy) publications and related analytical standards for sample dissolution and trace elemental analysis.

For implementation, consult the relevant Parts of ISO 7627 for detailed procedures, calibration ranges and instrument parameters specific to each element.

ISO 7627-1:1983

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 7627-2:1983

Hardmetals — Chemical analysis by flame atomic absorption spectrometry — Part 2: Determination of calcium, po…

ISO 8212:1986

Soaps and detergents — Techniques of sampling during manufacture

ISO 20662:2020

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 3021:2023

Adventure tourism — Hiking and trekking activities — Requirements and recommendations

ISO 3826-2:2008

Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…

ISO/IEC 24730-1:2014

Information technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)

ISO 8668-5:1992

Aircraft — Terminal junction systems — Part 5: Detail specification for type 3 system

ISO 7574-3:1985

Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and e…