ISO 7632:1985

Name: ISO 7632:1985 — Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
SKU: ISO 7632:1985
Price: 25 EUR
Availability: InStock

Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

Название (английский):

ISO 7632:1985

Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 13 июня 1985 г.
Издание:: ISO IS 7632 edition 1 version 1
ICS:: 43.040.40

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

Specifies the performance test methods and requirements for seals used in disc brake cylinders. Applies to solid section type seals (square, rectangular,'O'-ring) mounted stationary in the cylinder bore or on the movable piston of disc brakes. Describes the apparatus, preparation of specimens, and test procedures; lists test requirements.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 7632:1985 specifies performance test methods and requirements for elastomeric seals used in hydraulic disc brake cylinders intended for use with a petroleum‑based hydraulic brake fluid (service temperature up to 120 °C). The standard applies to solid‑section seals (square, rectangular and O‑ring types) mounted either stationary in the cylinder bore or on the movable piston. It defines required test apparatus, specimen preparation, test procedures and pass/fail criteria to ensure reliable sealing performance across temperature, chemical and mechanical stresses.

Key topics and technical requirements

Scope and seal types: Solid section seals - square, rectangular and O‑ring - for disc brake pistons and bores; service temperature range −40 to +120 °C.

Test fluid: Use the ISO reference petroleum‑base brake fluid (ISO 7309).

Marking: Each seal must bear a green identification mark indicating suitability for petroleum‑base fluid (ink or tinted elastomer).

Physical and chemical tests:

Resistance to fluid at elevated temperature (120 ±2 °C, immersion 70 h): limits on volume change (0 to +15 %) and hardness change (typically within −7 to +8 IRHD after fluid exposure); precipitation (sediment) not to exceed 0.3 % by volume.
Accelerated heat (dry air) ageing per ISO 188: allowable hardness change and no blistering/cracking.
Hardness measured by IRHD per ISO 48; volume per ISO 1817.

Mechanical/stability tests:

Ambient, high‑temperature and high‑cycle stroking tests simulating piston movement (including 70 h at 120 °C, up to 500 000 cycles where specified).
Leakage tests: high‑pressure (0.7 MPa for 5 min) and low‑pressure static tests (≈10 kPa for 24 h) after conditioning.
Low‑temperature leakage at −40 °C with piston position cycling to simulate lining wear.
Cycling humidity storage / corrosion test: 12‑day humidity/temperature cycle (95 % RH) to detect corrosion, adhesion or deterioration.

Apparatus and specimen prep: ovens, test jars, centrifuge and stroking fixtures; specimens cleaned with hexane (brief contact) before testing.

Applications and users

Brake component manufacturers and elastomer formulators for design verification and quality control.

Automotive OEMs and suppliers specifying seal performance for disc brake systems.

Independent test laboratories and certification bodies performing compliance/validation testing.

Design and reliability engineers assessing seal compatibility with petroleum‑based brake fluids.

Benefits: ensures material compatibility, prevents leakage/failure across temperature extremes, and supports safety and durability of hydraulic disc brakes.

Related standards

ISO 7309 - Reference petroleum base hydraulic brake fluid

ISO 48 - Vulcanized rubbers - Hardness (IRHD)

ISO 1817 - Determination of effect of liquids on vulcanized rubber

ISO 188 - Accelerated ageing / heat‑resistance tests

ISO 7631 - Elastomeric cups and seals for hydraulic braking systems

Keywords: elastomeric seals, hydraulic disc brake cylinders, petroleum‑based brake fluid, ISO 7632, O‑ring seals, IRHD hardness, leakage test, high temperature stroking, seal performance testing.

ISO 7632:1985

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 7309:1985

Road vehicles — Hydraulic braking systems — ISO reference petroleum base fluid

ISO 18825-1:2016

Clothing — Digital fittings — Part 1: Vocabulary and terminology used for the virtual human body

ISO 4850:1979

Personal eye-protectors for welding and related techniques — Filters — Utilisation and transmittance requirem…

ISO 18172-2:2007

Gas cylinders — Refillable welded stainless steel cylinders — Part 2: Test pressure greater than 6 MPa

ISO 7631:1985

Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base…