Overview
ISO 7726:1998 - "Ergonomics of the thermal environment - Instruments for measuring physical quantities" defines minimum characteristics and measurement methods for instruments used to record the physical quantities that characterize thermal environments. It standardizes how to measure parameters needed to assess thermal comfort and thermal stress (hot or cold) without prescribing a single comfort index. The document distinguishes two measurement classes: Type C (comfort) for moderate environments and Type S (stress) for harsher or extreme thermal conditions. Annexes A–H provide practical measurement guidance for specific quantities.
Key topics and technical requirements
- Measured quantities: air temperature, mean radiant temperature, plane radiant temperature (and radiant asymmetry), absolute humidity (vapour partial pressure), air velocity (including turbulence), surface temperature and operative temperature.
- Instrument characteristics: defining minimum measuring ranges, accuracy and 90% response times for sensors. Time constant notion: response time ≈ 2.3 × time constant (90% response).
- Measurement methods: recommended sensors and methods described in annexes - e.g., black globe thermometer (for approximating mean radiant temperature), psychrometer or dew‑point sensors (for absolute humidity), contact and infrared thermometers (for surface temperature), and radiometers (for plane radiant temperature).
- Data treatment: recording of velocity fluctuations, mean velocity (Va), standard deviation (SD) and turbulence intensity TU = (SD / Va) × 100%. Guidance on integrating heterogeneous radiation fields (mean vs plane radiant temperature) and using shape/angle factors.
- Intended use: standard acts as reference for manufacturers’ specifications, measurement contracts, and in situ monitoring suitable for both comfort and heat/cold stress assessment.
Applications and who uses this standard
ISO 7726 is practical for:
- Ergonomists and occupational health professionals assessing workplace thermal stress.
- HVAC and building services engineers validating environmental measurements for HVAC design and commissioning.
- Facility managers and energy consultants monitoring indoor thermal comfort.
- Researchers conducting thermal environment studies and human thermal balance experiments.
- Test and instrumentation manufacturers defining sensor performance and labeling.
- Contracting parties specifying measurement requirements in procurement or compliance contracts.
Use cases include thermal comfort surveys, heat-stress monitoring, validation of climate control systems, and research linking measured physical quantities to indices such as PMV/PPD (see ISO 7730).
Related standards
- ISO 7730:1994 - Moderate thermal environments; determination of PMV and PPD and specification of thermal comfort conditions.
- Annexes A–H of ISO 7726 give detailed measurement procedures and bibliography for further reading.
Keywords: ISO 7726:1998, ergonomics of the thermal environment, thermal comfort measurement, mean radiant temperature, air velocity, humidity measurement, black globe thermometer, psychrometer, HVAC measurement.