ISO 7752-1:2010

Overview

ISO 7752-1:2010 - "Cranes - Control layout and characteristics - Part 1: General principles" defines the general principles and requirements for the control layout and characteristics of crane controls. It establishes ergonomic, safety and functional rules for controls and consoles used to position suspended loads and serves as the basis for the detailed standards for specific crane types (mobile, tower, jib, overhead).

Key topics and technical requirements

• Scope & design principles
  • Controls and control stations shall be designed according to ISO 12100 (risk assessment and reduction) and meet electrical safety per IEC 60204-32.
  • Emergency stop: provided at each control station; remote stations require a stop covering all motions.
  • Controls normally return automatically to the “off”/neutral position when released (except stop).
  • Controls must initiate motion only from neutral, or alternate safeguards applied when impracticable.
• Ergonomics & operator fatigue
  • Actuation force limits: forward/back levers 5–60 N; sideways 5–20 N (up to 40 N in high-acceleration locations).
  • Pedals: ankle ≤50 N; leg ≤100 N (except hydraulic brake).
  • Pushbuttons (finger/thumb) ≤10 N (exceptions for emergency and power controls); foot pushbuttons ≤100 N.
  • Hand-driven movements: hauling chain/ horizontal push ≤250 N; crank/hand-wheel ≤150 N; lever horizontal ≤250 N.
  • Control temperature shall not exceed 43 °C.
• Control arrangement & spacing
  • Controls should align with natural limb movements and mirror crane motion logic at all stations.
  • Clear symbols must identify control functions and direction of movement.
  • Minimum clearances: e.g., 50 mm for high-force handles, 25 mm for ≤50 N handles, 10–15 mm between pushbuttons, 100 mm for pedals.
• Consoles, cables & portability
  • Consoles must include a distinct control for acoustic warning; portable consoles require straps and meet shock/rough-handling tests (IEC 60068-2-27/-31).
  • Pendant consoles positioned to keep operators outside danger zones; cable length/flexibility to allow safe positioning.
  • Where multiple consoles exist, only one shall be operational at a time (with safety exceptions for stop).
• Wireless controls (Annex A)
  • Additional requirements beyond IEC 60204-32: marking to indicate wireless control, continuous visual or pre-movement acoustic/visual warnings, manufacturer guidance to avoid interference, and declaration of stop-function delay.

Applications and who uses this standard

• Practical uses: design and validation of crane control panels, human-machine interface layout, procurement specifications, safety compliance checks, and risk assessments for lifting operations.
• Primary users: crane manufacturers, control-system designers, safety engineers, machine designers, crane inspectors, site managers, and standards/certification bodies.

Related standards

• ISO 12100 (safety of machinery - design principles)
• IEC 60204-32 (electrical equipment of hoisting machines)
• ISO 7752 Parts 2–5 (specific crane types: mobile, tower, jib, overhead)
• IEC 60068 environmental test standards

Keywords: ISO 7752-1, crane controls, control layout, crane console, wireless crane control, crane ergonomics, IEC 60204-32, ISO 12100, crane safety.