Name: ISO 9125:2009 — Fibre-cement slates and fittings — Product specification and test methods
SKU: ISO 9125:2009
Price: 25 EUR
Availability: InStock

Abstract

Overview

ISO 9125:2009 - Fibre‑cement slates and fittings - Product specification and test methods - defines uniform product specifications and laboratory test methods for fibre‑cement slates, shingles and matching fibre‑cement fittings used on weather‑exposed roof and cladding surfaces. The standard applies to slates for overlapping assembly with a height not exceeding 850 mm. It is performance‑based and intended to harmonize requirements internationally for manufacturers, purchasers and testing laboratories.

Key topics and requirements

Scope and exclusions
- Covers inspection and type tests for fibre‑cement slates, shingles and fittings.
- Excludes asbestos‑reinforced slates and does not evaluate coatings in isolation (colour fastness, adhesion are covered by other standards).
- Does not include installation calculations (wind uplift, rain proofing); national installation standards apply.
Product composition and reinforcement
- Specifies acceptable materials (cement or calcium silicate matrix) and reinforcement types (cellulose, synthetic organic, glass fibres), including reinforcement patterns.
Classification and performance
- Products are grouped by frost resistance and by bending moment classes (mechanical strength).
- Physical characteristics such as apparent density, dimensional tolerances and appearance/finish requirements are defined.
Test methods (normative annexes)
- Dimensional and geometrical tests; bending moment (flexural strength) test; apparent density; water permeability; freeze–thaw, heat‑rain, warm‑water and soak‑dry durability evaluations.
- Sampling, type testing, quality control procedures and consignment inspection methods are specified.
Conformity and marking
- Procedures for type testing, manufacturer quality control systems, sampling plans and marking requirements are included to support conformity assessment.

Applications and users

Primary users: manufacturers of fibre‑cement slates and fittings, product test laboratories, quality managers, and compliance officers.
Secondary users: architects, specifiers, building contractors, procurement teams and regulators who need reliable, standardized product performance data for roofing and cladding projects.
Practical uses: product development, type approval, quality control, tender specifications, and comparative performance assessment for roofing/cladding materials.

Related standards

Normative references within ISO 9125:2009 include ISO 390, ISO 2859‑1, ISO 3951‑1, ISO 12468‑1/2.
The standard was developed to align where possible with national standards (CEN, ASTM, JIS). Coating performance and installation practice are covered by other ISO or national documents.

Keywords: ISO 9125:2009, fibre‑cement slates, fittings, product specification, test methods, roofing, cladding, bending moment, freeze‑thaw, water permeability.

ISO 9125:2009

Похожие стандарты

Abstract

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

ISO 3909:1976

Hardmetals — Determination of cobalt — Potentiometric method

BS ISO 28591:2017

Sequential sampling plans for inspection by attributes.

BS ISO 39511:2018

Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation).

ISO 12468-1:2013

External exposure of roofs to fire — Part 1: Test method