SIST EN ISO 16315:2026
Small craft - Electrical systems used for electrical propulsion (ISO 16315:2026)
Small craft - Electrical systems used for electrical propulsion (ISO 16315:2026)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 38
- Дата публикации:
- 14 июля 2026 г.
- Издание:
- ISO 16315:2026
- ICS:
- 47.020.60
This document specifies the design and installation of alternating current (AC) and direct current (DC) electrical systems used for the purpose of electrical propulsion and/or the electrical part of a hybrid propulsion system (system with both a rechargeable battery and a fuelled power source). This document is applicable to electrical propulsion systems operated in the following ranges either individually or in combination: direct current of less than 1 500 V DC; single-phase alternating current up to AC 1 000 V; three-phase alternating current up to AC 1 000 V. This document is applicable to electrical propulsion systems installed in small craft up to 24 m length of the hull (LH in accordance with ISO 8666).
Abstract
Overview
SIST EN ISO 16315:2026 - "Small craft - Electrical systems used for electrical propulsion (ISO 16315:2026)" defines the requirements for the design, installation, and safety measures for alternating current (AC) and direct current (DC) electrical systems used in electric and hybrid propulsion systems on small craft up to 24 meters in hull length. The standard applies to systems using DC voltages less than 1,500 V, single-phase AC up to 1,000 V, or three-phase AC up to 1,000 V, ensuring that these electrical propulsion systems are safe, reliable, and effective.
Key Topics
- Scope and Application: Covers electric propulsion systems in small craft, including those that integrate hybrid systems combining batteries and fuel-based power sources.
- Electrical System Design: Guidance on AC and DC system configuration, appropriate voltage ranges, and system integration.
- Safety Measures: Procedures for protection against electric shock, fire hazards, and overcurrent scenarios.
- Component Requirements: Specifications for essential components such as batteries, transformers, converters, motors, cables, disconnectors, and circuit protection devices.
- Installation Procedures: Requirements for proper installation, cable segregation, environmental considerations, and identification of conductors and equipment.
- EMC and Environment: Addresses electromagnetic compatibility (EMC) and environmental factors relevant to marine electric systems.
- Controls and Monitoring: Criteria for system controls, monitoring instruments, alarm systems, and protective devices.
- Testing and Documentation: Outlines validation procedures and documentation requirements for testing and ongoing maintenance.
Applications
SIST EN ISO 16315:2026 is crucial for:
- Small Craft Manufacturers: Ensuring electrical propulsion and hybrid systems are designed and installed according to international safety and performance standards.
- Marine Electrical Installers: Providing practical guidelines for component selection, wiring, battery management, segregation of AC/DC systems, and control systems to ensure safe installation.
- Naval Architects and System Designers: Enabling the selection of compatible components and system architectures for safe, efficient propulsion and auxiliary power.
- Owners and Operators: Offering guidance on operational safety, emergency procedures, system monitoring, and maintenance for electrically powered or hybrid-propulsion small craft.
- Regulatory Bodies: Serving as a benchmark for conformity assessment and compliance with national and European regulations for marine electrical propulsion systems.
Practical applications include pleasure boats, yachts, and small commercial craft-especially as electric and hybrid marine propulsion systems become increasingly common due to their environmental benefits and efficiency.
Related Standards
For comprehensive marine electrical system safety and integration, consider these related standards:
- ISO 13297: Small craft - Electrical systems - Alternating current installations
- ISO 10133: Small craft - Electrical systems - Extra-low-voltage DC installations
- IEC 60092-507: Electrical installations in ships - Part 507: Small vessels
- ISO 8846: Small craft - Electrical devices - Protection against ignition of flammable gases
- ISO 9094: Small craft - Fire protection
- ISO 25197: Small craft - Electrical/electronic control systems for steering, shift, and throttle
- IEC 60533 / IEC 62742: Electromagnetic compatibility (EMC) for ships
Summary
SIST EN ISO 16315:2026 establishes best practices and harmonized requirements for electrical propulsion systems on small craft. Adhering to this standard ensures robust, safe, and environmentally responsible design and installation of AC and DC propulsion systems, supporting innovation and compliance across the marine industry. In the context of the growing adoption of electric and hybrid technology in the maritime sector, this standard is vital for manufacturers, installers, and regulators, helping to improve safety, performance, and trust in electrically-propelled small craft.
Технические детали
- Технический комитет
- I13 - Imaginarni 13
- SKU
- SIST EN ISO 16315:2026
Похожие стандарты
Стандарты, упомянутые в описании
ISO 16315:2026
ДействующийSmall craft — Electrical systems used for electrical propulsion
Overview ISO 16315:2026 specifies requirements for the design and installation of electrical systems used in the propulsion of small craft. Developed by the International Organization for Standardiza…
ISO 13297:2014
ОтменёнSmall craft — Electrical systems — Alternating current installations
ISO 10133:2012
ОтменёнSmall craft — Electrical systems — Extra-low-voltage d.c. installations
IEC 60092-507:2014
ДействующийElectrical installations in ships - Part 507: Small vessels
Overview IEC 60092-507:2014 is an international standard published by the International Electrotechnical Commission (IEC) that sets forth requirements for the electrical installations in small vessel…
ISO 8846:2025
ДействующийSmall craft — Electrical devices — Protection against ignition of surrounding flammable gases
Overview ISO 8846:2025 - "Small craft - Electrical devices - Protection against ignition of surrounding flammable gases" defines test methods and design requirements to ensure electrical equipment on…
ISO 9094:2015
ОтменёнSmall craft — Fire protection
ISO 25:1976
ОтменёнCinematography — Camera usage of 16 mm motion-picture film — Specifications
IEC 60533:2015
ДействующийElectrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metalli…
Overview IEC 60533:2015 - Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull - defines minimum requirements for electromagnetic compat…