BS EN 13649:2002
Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Activated carbon and solvent desorption method
Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Activated carbon and solvent desorption method
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 4 февраля 2002 г.
- ICS:
- 13.040.40
- SKU:
- BS EN 13649:2002
Abstract
Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method Executive summary Activated carbon and solvent desorption method for the determination of the mass concentration of individual gaseous organic compounds. Abstract This European Standard specifies procedures for the sampling onto activated carbon, the preparation and the analysis of samples of volatile organic components such as those arising from solvent using processes. It can be used as a reference method. The results obtained using this standard are expressed as the mass concentration (mg/m3) of the individual gaseous organic components. This standard is suitable for use in the range of approximately 0.5 mg/m3 to 2 000 mg/m3. For the measurement of the mass concentration of total organic carbon arising from solvent using processes EN 13526 should be used. History and related standards This European Standard includes the following cross references: EN 13526:2001, ISO 5725-1, ISO 9169.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 5725-1:2023
ДействующийAccuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definit…
Overview ISO 5725-1:2023, "Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions," is published by the International Organization for Stand…
ISO 9169:2006
ДействующийAir quality — Definition and determination of performance characteristics of an automatic measuring system
Overview ISO 9169:2006 - Air quality: Definition and determination of performance characteristics of an automatic measuring system defines terms and specifies methods to determine the performance cha…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…