BS ISO 10300-3:2014

1   Scope This part of ISO 10300 specifies the fundamental formulae for use in the tooth root stress calculation of straight and helical (skew), Zerol and spiral bevel gears including hypoid gears, with a minimum rim thickness under the root of 3,5 m mn . All load influences on tooth root stress are included, insofar as they are the result of load transmitted by the gearing and able to be evaluated quantitatively. Stresses, such as those caused by the shrink fitting of gear rims, which are superposed on stresses due to tooth loading, are intended to be considered in the calculation of the tooth root stress , σ F , or the permissible tooth root stress σ FP . This part of ISO 10300 is not applicable in the assessment of the so-called flank breakage, a tooth internal fatigue fracture (TIFF). The formulae in this part of are based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of ε vα  < 2. The results are valid within the range of the applied factors as specified in (see also [ 1 ] ). Additionally, the given relationships are valid for bevel gears, of which the sum of profile shift coefficients of pinion and wheel is zero (see ). This part of does not apply to stress levels above those permitted for 10 3 cycles, as stresses in that range could exceed the elastic limit of the gear tooth.