EN ISO 13807:2022

Overview

EN ISO 13807:2022 specifies a standardized test method for determining the crack formation temperature in vitreous and porcelain enamels used in the chemical industry. Developed by CEN and ISO, this standard is essential for comparing the relative quality of various enamel formulations when subjected to thermal shock using cold water. The procedure involves enamelled steel specimens and is designed to assess the fundamental thermal shock resistance of enamel coatings, rather than the performance of finished products.

Keywords: EN ISO 13807:2022, vitreous enamels, porcelain enamels, crack formation temperature, thermal shock testing, enamel quality, chemical industry.

Key Topics

• Crack Formation Temperature Test The standard outlines a method to identify the temperature at which the first cracks or chipping appear in enamelled specimens when exposed to cold water after being heated. This property is critical for evaluating raw enamel formulations and their suitability for use in demanding chemical processing environments.

• Test Specimen Preparation Enamelled steel samples are prepared and heated according to strict guidelines. The enamel is applied and fired using methods consistent with industrial practices, ensuring test relevance for enamel manufacturers and users.

• Thermal Shock Procedure

  • Specimens are heated to incrementally higher temperatures and then rapidly cooled with water.
  • Damage is inspected visually and enhanced using electrostatically charged talcum powder to make fine cracks visible.
  • The temperature where damage first appears is recorded as the crack formation temperature.

• Result Interpretation Results enable the comparison of different enamel types. However, values may not translate directly to finished industrial components, as additional stresses from manufacturing or application can influence enamel performance.

Applications

• Chemical Industry Equipment The standard is particularly relevant for manufacturers and users of enamelled equipment and vessels in the chemical sector. Monitoring the crack formation temperature helps in selecting enamels that best withstand thermal cycling and harsh operational conditions.

• Quality Assurance

  • Enables consistent quality control of enamel supplies and production batches.
  • Facilitates supplier evaluation and formulation development by providing a reproducible basis for comparison.

• Research and Development Useful for enamel producers and R&D laboratories aiming to innovate or improve thermal shock resistance in vitreous and porcelain enamels, ensuring products meet industry expectations for durability.

• Specification Compliance Assists purchasers and specifiers in documenting and verifying enamel quality for project requirements, supporting technical procurement decisions.

Related Standards

• ISO 2178: Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method
• ISO 2746: Vitreous and porcelain enamels - High voltage test
• ISO 3819: Laboratory glassware - Beakers
• ISO 19496-1: Vitreous and porcelain enamels - Terminology - Part 1: Terms and definitions

These related standards support the accurate preparation, measurement, and terminology essential for implementing EN ISO 13807:2022.

EN ISO 13807:2022 is a key reference for ensuring the reliability and comparability of enamelled steel products in the chemical industry, supporting both manufacturers and end-users in maintaining high standards of product performance and safety.