EN ISO 13854:2019

Name: EN ISO 13854:2019 — Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)
SKU: EN ISO 13854:2019
Price: 27000 RUB
Availability: InStock

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)

Название (английский):

EN ISO 13854:2019

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 25 сентября 2019 г.
Издание:: CEN EN 13854 edition 2 version 1
ICS:: 13.110

Тип поставки:

Full version27 000 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:27 000 ₽

Описание (английский):

ISO 13854:2017 enables the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. It specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method. ISO 13854:2017 is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in. NOTE For impact, shearing, drawing-in hazards, additional or other measures are to be taken.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 13854:2019 / ISO 13854:2017 - "Safety of machinery - Minimum gaps to avoid crushing of parts of the human body" provides guidance for avoiding crushing hazards by specifying minimum gaps between moving and fixed parts of machinery. Adopted by CEN as EN ISO 13854:2019, this Type B1 safety standard is intended for use when adequate protection can be achieved solely by maintaining specified clearances. It applies to crushing hazards only and does not address impact, shearing, drawing‑in or other hazard types - additional measures are required for those.

Key topics

Scope and intent

Defines the method for using minimum gaps to prevent crushing of body parts.
Applicable only where gap-sizing alone provides adequate safety.

Methodology

Follows the iterative risk‑reduction strategy of ISO 12100: identify crushing zones, assess risks, select appropriate minimum gaps, and verify adequacy.
Considers accessibility of crushing zones, anthropometry (including children and different ethnic groups), and technical/practical constraints.

Selection and application

Users select gaps from the standard’s Table 1 (body‑part related values) and apply the value for the largest body part at risk.
If required gaps cannot be achieved, the standard mandates additional or alternative protective measures.

Practical considerations

Account for bulky clothing, tools, and thick‑soled footwear that increase effective body dimensions.
Use of protective structures with restricted openings to prevent access of larger body parts is described; opening dimensions and distances relate to guidance in ISO 13857.

Supporting material

Annex A provides illustrations of crushing zones.
Annex ZA links the standard to essential requirements of EU Machinery Directive 2006/42/EC.

Applications

Who uses EN ISO 13854 and why:

Machine designers and manufacturers - to design guards and inter‑part clearances that prevent crushing injuries.

Standards writers (type‑C standards) - to incorporate minimum‑gap requirements into machine‑specific safety standards.

Health & safety bodies and regulators - to evaluate conformity and guide machine safety assessments.

Employers and maintenance providers - to assess residual machine risks and decide on supplementary protections.

Practical uses include gap specification during design reviews, hazard assessments, conformity demonstrations under EU machinery regulations, and selection of guarding solutions when space constraints limit other safeguards.

Related standards

ISO 12100 - General principles for design; risk assessment and reduction (iterative safety strategy).

ISO 13857 - Safety distances to prevent access by upper and lower limbs (complements gap/opening guidance).

EN ISO 13854 supersedes earlier EN 349:1993+A1:2008; consult the standard text for normative Table 1 values and detailed application rules.

Keywords: EN ISO 13854, ISO 13854, minimum gaps, safety of machinery, crushing hazards, machine design, guarding, risk assessment.

EN ISO 13854:2019

Abstract

Похожие стандарты

Overview

Key topics

Applications

Related standards

Технические детали

ISO 13854:2017

Safety of machinery — Minimum gaps to avoid crushing of parts of the human body

SIST-TP CEN ISO/TR 22100-5:2022

Safety of machinery - Relationship with ISO 12100 - Part 5: Implications of artificial intelligence machine l…

SIST EN ISO 13857:2020

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13…

SIST EN ISO 13854:2020

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)