IEC 61300-2-11:2023

Overview

IEC 61300-2-11:2023 specifies basic test and measurement procedures for axial compression of fibre optic interconnecting devices and passive components. The standard ensures that cable captivation or attachment to devices (for example, fibre optic closures and splice enclosures) will withstand compressive axial loads encountered in normal service. The 2023 third edition is a technical revision that adds a terms clause, updates severity guidance, and includes recommended severities for tubes and cables without strength‑member attachment.

Key topics and requirements

• Purpose: Verify mechanical integrity of cable attachment under axial compressive loads.
• Apparatus: Requires a fixed clamping device for the device under test (DUT), a movable clamping device for the cable (clamp length ≥ 3× cable diameter), a force generator, and a force gauge.
• Mounting geometry: Distance L between rear of strain relief and movable cable clamp ≤ 2× cable diameter to prevent buckling.
• Preconditioning and recovery: Precondition specimens for at least 2 h at standard atmospheric conditions; allow at least 4 h recovery after load removal.
• Load application: Apply axial compressive load smoothly, maintain for a minimum of 2 minutes (unless otherwise specified).
• Examination: Initial and post‑test visual inspections per IEC 61300-3-1, checking for cracks, deformation, loose or displaced parts, jacket/seal damage, fibre breakage, and optical degradation.

• Severity (recommended): The standard gives recommended axial loads (Table 1). Typical guidance: