ISO 10354:1992

Name: ISO 10354:1992 — Adhesives — Characterization of durability of structural-adhesive-bonded assemblies — Wedge rupture test
SKU: ISO 10354:1992
Price: 7200 RUB
Availability: InStock

Adhesives — Characterization of durability of structural-adhesive-bonded assemblies — Wedge rupture test

Название (английский):

ISO 10354:1992

Adhesives — Characterization of durability of structural-adhesive-bonded assemblies — Wedge rupture test

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 2 апреля 1992 г.
Издание:: ISO IS 10354 edition 1 version 1
ICS:: 83.180

Тип поставки:

Full version7 200 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:7 200 ₽

Описание (английский):

Simulates in a qualitative manner the forces and effects on an adhesive-bonded joint at a metal-adhesive/primer interface. It can also be used as a method of checking the surface preparation of substrates. The test is applicable at the present time to the bonding of aluminium and titanium alloys, but may be used for other metals and plastics, provided consideration is given to the thickness and rigidity of the adherends.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 10354:1992 specifies the wedge rupture test for characterizing the durability of structural adhesive‑bonded assemblies. The method simulates, in a qualitative way, forces acting at a metal–adhesive/primer interface and can be used to assess surface preparation and the durability of bonded joints - primarily for aluminium and titanium alloys, and potentially other metals and plastics when adherend thickness and rigidity are considered.

Key topics and requirements

Test principle: Progressive insertion of a wedge between bonded plates causes an initial crack; the crack length and any propagation after laboratory ageing are measured to evaluate durability.

Specimen preparation: Bond two plates, cut strips (typical specimen size 150 mm × 27 mm × (3 ± 0.1) mm) and machine to 25 mm ± 0.1 mm width. Apply thin anti‑adhesive tape beyond the bond zone to control crack initiation.

Aging: Age specimens under conditions defined in ISO 9142 (standard laboratory ageing conditions) before testing.

Wedge and driving device: Use a chemically non‑reactive wedge (stainless steel recommended) and a device that drives the wedge at a controlled speed of 30 mm/min ± 5 mm/min without oblique movement.

Measurements and equipment:

Measure adhesive layer thickness to 0.01 mm accuracy.
Use a binocular magnifier (x10–x40) to locate and mark crack positions.
Measure initial (l0) and final (lF) crack lengths; compute propagation Δl = (lF − l0).

Sample size: Conduct the test on at least 10 specimens.

Reporting: Report identification of adhesive/primer, adherend material, surface preparation, bonding procedure, ageing conditions, failure pattern (per ISO 10365), individual l0 and lF for each specimen, and arithmetic means. Note: inter‑laboratory precision data were not available at publication.

Practical applications

Quality control and R&D for structural adhesives in aerospace, automotive, marine and general engineering where metal-to-metal or metal-to-polymer bonds are critical.

Surface preparation verification to check primer and pretreatment effectiveness on aluminium and titanium assemblies.

Comparative durability screening of adhesive formulations and bonding processes after defined laboratory ageing.

Related standards

ISO 4588 (Preparation of metal surfaces for adhesive bonding)

ISO 9142 (Guide to selection of laboratory ageing conditions for bonded joints)

ISO 10365 (Designation of main failure patterns for adhesive joints)

Keywords: ISO 10354, wedge rupture test, adhesives, adhesive‑bonded assemblies, durability testing, aluminium bonding, titanium bonding, surface preparation, crack propagation.

ISO 10354:1992

Abstract

Похожие стандарты

Overview

Key topics and requirements

Practical applications

Who uses this standard

Related standards

Технические детали

BS EN ISO 9142:2003

Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints

BS EN ISO 10365:2022

Adhesives. Designation of main failure patterns.

ISO 4588:1995

Adhesives — Guidelines for the surface preparation of metals