ISO 10592:2022

Name: ISO 10592:2022 — Small craft — Remote hydraulic steering systems
SKU: ISO 10592:2022
Price: 41400 RUB
Availability: InStock

Small craft — Remote hydraulic steering systems

Название (английский):

ISO 10592:2022

Small craft — Remote hydraulic steering systems

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 23
Дата публикации:: 1 июня 2022 г.
Издание:: ISO IS 10592 edition 2 version 1
ICS:: 47.080

Тип поставки:

Full version41 400 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:41 400 ₽

Описание (английский):

This document specifies the requirements for the design, installation and testing of engine-mounted and craft-mounted remote hydraulic steering systems used with single and multiple engine installations of outboard engines over 15 kW per engine, as well as with single and multiple engines of inboard, sterndrive, and water jet drives, all used on small craft. This document does not address emergency means of steering the craft.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 10592:2022 - Small craft - Remote hydraulic steering systems specifies design, installation and testing requirements for remote hydraulic steering systems used on small craft. It applies to engine‑mounted and craft‑mounted systems for outboard engines over 15 kW per engine and to inboard, sterndrive and water‑jet drives in single and multiple engine installations. The standard covers component selection, system pressures, mechanical interfaces and verification testing. It does not address emergency steering means.

Key topics and technical requirements

Scope and definitions - Clarifies terms such as hydraulic helm, output device, system torque, system design peak pressure and minimum retained system performance (e.g., ≥90% travel attainable with ≤27 Nm helm torque after tests).

Design and installation - The craft manufacturer must install complete systems from control element to the appropriate output/connection points; threaded fasteners that could cause total loss of steering must be locked or otherwise secured; simple spring‑only quick‑disconnects are not permitted.

Materials and environmental limits - Components must operate between −20 °C and +80 °C and withstand storage between −40 °C and +85 °C.

Hydraulic component ratings - All parts (helms, lines, fittings, cylinders) must be marked and have component proof pressure at least equal to the helm’s system proof pressure. Component burst pressure must be at least the system design peak pressure or twice the component proof pressure, whichever is greater.

Safety and connection integrity - Hydraulic quick‑connects that affect steering integrity must provide a two‑stage integral locking mechanism.

Testing requirements - Includes installed proof tests, system application tests and component tests. Example requirements: impulse load sequence using system design peak pressure followed by half that pressure for ≥0.5 s; load applied within 13° of centre; system movement limited (≤17°) after relief events.

Practical applications - who uses ISO 10592:2022

Boat and small craft manufacturers - to specify and install compliant steering systems during construction.

Steering system and component manufacturers - to design helms, cylinders, lines and fittings that meet proof/burst pressure and temperature requirements.

Marine installers and service technicians - to perform correct installation, secure fasteners and validate connections.

Surveyors, test labs and regulators - to verify compliance through the prescribed tests and documentation.

Naval architects and system integrators - for selecting steering architectures and ensuring safe interfaces for single and multiple engine installations.

Related standards

ISO 8848:2022 - Small craft - Remote mechanical steering systems

ISO 12217‑1/2/3:2015 - Small craft - Stability and buoyancy assessment and categorization (relevant for craft classification and safety considerations)

Keywords: ISO 10592:2022, remote hydraulic steering systems, hydraulic helm, small craft steering, system proof pressure, steering system testing, outboard engine steering, marine installation standard.

ISO 10592:2022

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications - who uses ISO 10592:2022

Related standards

Технические детали

ISO 8848:2022

Small craft — Remote mechanical steering systems

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines