ISO 10896-6:2015

Name: ISO 10896-6:2015 — Rough-terrain trucks — Safety requirements and verification — Part 6: Tilting operator's cabs
SKU: ISO 10896-6:2015
Price: 25 EUR
Availability: InStock

Rough-terrain trucks — Safety requirements and verification — Part 6: Tilting operator's cabs

Название (английский):

ISO 10896-6:2015

Rough-terrain trucks — Safety requirements and verification — Part 6: Tilting operator's cabs

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 5
Дата публикации:: 8 декабря 2015 г.
Издание:: ISO IS 10896 edition 1 version 1
ICS:: 53.060

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO 10896-6:2015 specifies safety requirements and means of verification for tilting operator's cabs of trucks covered by ISO 10896‑1 and ISO 10896‑2, where the seat index point (SIP) height is lifted not more than 400 mm when the cab is fully tilted. ISO 10896-6:2015 only deals with significant hazards, hazardous situations or hazardous events relevant to the tilting cab affixed to trucks.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 10896-6:2015 specifies safety requirements and verification methods for tilting operator’s cabs fitted to rough‑terrain trucks (as covered by ISO 10896‑1 and ISO 10896‑2). The standard applies where the seat index point (SIP) is raised by no more than 400 mm when the cab is fully tilted. It addresses significant hazards specifically related to the tilting cab and sets performance, testing and information-for-use requirements to reduce crushing, stability and impact risks.

Key topics and requirements

Scope limit: SIP lift ≤ 400 mm for the fully tilted cab.

Tilting geometry and motion:

Recommended maximum tilt angle: 20° from horizontal.
Maximum tilting speed: 5°/s under normal working conditions.

Controls and operation:

Tilting control must be clearly marked, separated, protected, and of hold-to-run type to prevent inadvertent activation.
Provisions to prevent truck travel when the cab is not in its defined travel position.

Stability and testing:

Stability verification per ISO 22915-14 or ISO 22915-24 (tests performed with cab in the most unfavourable tilted positions; tests T2 and T4 excluded).

Structural protection:

ROPS: must comply with ISO 3471 with modifications - treat the cab as an independent ROPS; apply vertical load tests in all planes; some ISO 3471 clauses are excluded.
FOPS: comply with ISO 3449; tests carried out with cab in lower and maximum tilt positions.

Maintenance and safety:

Mechanical support device required for maintenance when the cab is tilted; device must withstand twice the mass (×g) of the tilting cab.
Hazardous area between frame and cab base must be marked with warning signs.

Verification methods: measurement, visual examination and the specific tests referenced for ROPS/FOPS.

Information for use: operator manual must cover travel position, emergency procedures and use of the mechanical support device.

Applications and users

ISO 10896-6:2015 is intended for:

Rough‑terrain truck manufacturers designing tilting cabs and control systems.

Safety engineers and compliance teams conducting risk assessment and type testing.

Regulators and market surveillance verifying conformity to safety requirements.

Maintenance providers and fleet operators implementing safe maintenance and operating procedures. Practical uses include design validation, stability testing, operator manual content, and specifying safety devices (locks, supports, interlocks) for tilting cabs.

Related standards

ISO 10896-1, ISO 10896-2 (rough‑terrain truck general requirements)

ISO 12100 (machine safety - risk assessment)

ISO 3449 (FOPS) and ISO 3471 (ROPS)

ISO 22915‑14 / ISO 22915‑24 (stability verification)

ISO 5053 (terminology) and ISO 5353 (SIP definition)

ISO 20297-1 (lorry‑mounted trucks - related requirements)

Keywords: ISO 10896-6:2015, tilting operator’s cabs, rough-terrain trucks, safety requirements, verification, ROPS, FOPS, seat index point (SIP), stability testing.

ISO 10896-6:2015

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

BS ISO 10896-1:2020

Rough-terrain trucks. Safety requirements and verification. Variable-reach trucks.

BS ISO 10896-2:2016

Rough-terrain trucks. Safety requirements and verification. Slewing trucks.

BS ISO 22915-14:2010

Industrial trucks. Verification of stability. Rough-terrain variable-reach trucks.

ISO 22915-24:2015

Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks

BS EN ISO 3471:2008

Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements.

BS EN ISO 3449:2008

Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements.