ISO 12567-2:2005

Name: ISO 12567-2:2005 — Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 2: Roof windows and other projecting windows
SKU: ISO 12567-2:2005
Price: 45000 RUB
Availability: InStock

Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 2: Roof windows and other projecting windows

Название (английский):

ISO 12567-2:2005

Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 2: Roof windows and other projecting windows

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 25
Дата публикации:: 13 октября 2005 г.
Издание:: ISO IS 12567 edition 1 version 1
ICS:: 91.060.50

Тип поставки:

Full version45 000 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:5 раб. дн. (перевод)

Цена:45 000 ₽

Описание (английский):

ISO 12567-2:2005 specifies a method to measure the thermal transmittance of roof windows and projecting windows. It does not include: edge effects occurring outside the perimeter of the specimen, energy transfer due to solar radiation on the specimen and effects of air leakage through the specimen.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 12567-2:2005 - Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows - specifies a standardized laboratory method to measure the thermal transmittance (U-value) of roof windows and other projecting windows using a calibrated and guarded hot box method. It is intended to produce repeatable, comparable thermal performance data for product comparison and declaration.

The standard covers mounting and calibration procedures for projecting glazed products installed flush to the cold side of the surround panel (insert‑ or kerb/curb‑mounted). It clarifies test orientation (vertical mounting is acceptable for comparison purposes) and lists exclusions: edge effects outside the specimen perimeter, solar radiation effects, and air leakage through the specimen are not included.

Key Topics

Test principle: Measurement of steady‑state heat flow through roof and projecting windows using the hot box technique.

Specimen mounting: Install in a surround panel flush with the cold face; include flashings and kerb when representative of normal installation.

Calibration: Use calibration panels or CTS mounted flush with the cold face; calibration and specimen tests must be at the same orientation.

Environmental temperature: Determination of combined radiant and air temperatures (convective fraction derived from calibration measurements).

Edge zone treatment: Heat flow through the edge zone is accounted for using linear thermal transmittance (ψ) values (tables provided in the standard).

Apparatus requirements: Comply with ISO 8990 and ISO 12567‑1 where applicable; special provisions for baffle distance (cold side baffle ≥ 80 mm from glazing).

Reporting: Test report must include inclination, installation details, and specimen aperture area used to calculate U-value.

Applications

ISO 12567-2:2005 is used by:

Test laboratories performing hot box thermal measurements on roof windows and projecting windows.

Window and rooflight manufacturers for product thermal performance declaration and quality control.

Certification bodies and regulators requiring standardized U‑value data for product compliance and labeling.

Energy modelers, architects and façade engineers who require validated laboratory U‑values for building energy and thermal comfort calculations (values may be adjusted using national procedures for in‑situ orientation).

R&D teams optimizing glazing, frames, kerbs and flashings to reduce thermal transmittance.

Relevant SEO keywords: ISO 12567-2:2005, thermal transmittance, hot box method, roof windows, projecting windows, U-value, window thermal performance, calibration panels, linear thermal transmittance (ψ).

Related Standards

ISO 12567-1:2000 - Part 1: Complete windows and doors (method foundations and specimen sizes)

ISO 8990:1994 - Calibrated and guarded hot box

ISO 7345:1987 - Thermal insulation - Physical quantities and definitions

References for correction/calculation: ISO 15099, ISO 10077‑1, ISO 10077‑2, EN 673 (for additional convective/radiant calculations)

ISO 12567-2:2005

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 8990:1994

Thermal insulation — Determination of steady-state thermal transmission properties — Calibrated and guarded h…

BS EN ISO 8990:1996

Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot…

BS EN ISO 12567-1:2010

Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box method. Compl…

ISO 15099:2003

Thermal performance of windows, doors and shading devices — Detailed calculations

BS EN ISO 10077-1:2017

Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. General.

BS EN ISO 10077-2:2017+A1:2025

Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Numerical method fo…