ISO 14589:2000

Name: ISO 14589:2000 — Blind rivets — Mechanical testing
SKU: ISO 14589:2000
Price: 23400 RUB
Availability: InStock

Blind rivets — Mechanical testing

Название (английский):

ISO 14589:2000

Blind rivets — Mechanical testing

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 21 декабря 2000 г.
Издание:: ISO IS 14589 edition 1 version 1
ICS:: 21.060.40

Тип поставки:

Full version23 400 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:23 400 ₽

Описание (английский):

La présente Norme internationale spécifie les méthodes relatives aux essais mécaniques des rivets aveugles, y compris: - l'essai de résistance au cisaillement (voir article 3), - l'essai de résistance à la traction (voir article 3), - l'essai de retenue de la tête de rivet aveugle (voir article 4), - l'essai de résistance au désassemblage de la tige (avant pose) (voir article 5), et - l'essai de rupture de la tige (voir article 6), à une température ambiante comprise entre 10 °C et 35 °C. Elle s'applique aux rivets aveugles dont le diamètre nominal est inférieur ou égal à 6,4 mm.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 14589:2000 - "Blind rivets - Mechanical testing" defines standardized methods for mechanical tests on blind rivets. The standard covers test types, fixtures, procedures and acceptance criteria at ambient temperatures (10 °C to 35 °C) and applies to blind rivets with nominal diameters up to and including 6.4 mm. Test types specified include shear and tensile tests, mandrel head retention, mandrel push‑out (prior to setting) and mandrel break load testing.

Key topics and technical requirements

Test types covered

Shear test and tensile test (clause 3)
Mandrel head retention capability test (clause 4)
Mandrel push‑out resistance test (prior to setting) (clause 5)
Mandrel break load test (clause 6)

Test environment

Ambient temperature: 10 °C to 35 °C

Test machine and grips

Testing machines must comply with ISO 7500‑1 (verification/calibration of force‑measuring system)
Attachment grips shall be self‑aligning and apply load along the correct axis

Loading rate

Continuous loading at 7 mm/min to 13 mm/min until failure or movement

Test fixtures and materials

Routine and referee test fixtures are specified; referee fixtures/inserts are decisive in disputes
Test plates: steel hardness ≥ 420 HV30
Referee inserts: steel hardness ≥ 700 HV30
Annex A provides an example of a suitable tensile test fixture (informative)

Short rivet evaluation

Special acceptance categories if test plates or inserts fail before rivet failure (document lists criteria a–d)

Clearance hole diameters (selected values from Table 2)

Nominal rivet d = 2.4 mm → test hole max 2.60 mm, min 2.55 mm
d = 3.0 mm → max 3.20 mm, min 3.15 mm
d = 4.0 mm → max 4.20 mm, min 4.15 mm
d = 6.4 mm → max 6.60 mm, min 6.55 mm

Applications and who uses it

Quality control and inspection: manufacturers of blind rivets and fasteners use ISO 14589 to qualify product batches and validate mechanical performance.

Product development and R&D: engineering teams testing new rivet designs or materials rely on standardized mechanical test methods.

Procurement and compliance: buyers and specifiers in aerospace, automotive, construction and electronics reference ISO 14589 for supplier acceptance criteria.

Test laboratories: accredited test houses performing routine and referee testing follow the fixture, hardness and procedure requirements in this standard.

Related standards

ISO 7500‑1:1999 - Metallic materials: verification of static uniaxial testing machines (normative reference in ISO 14589)

Annex A (ISO 14589) - informative example of a tensile test fixture

Keywords: ISO 14589, blind rivets mechanical testing, blind rivet testing, shear test, tensile test, mandrel break load, mandrel push out, mandrel head retention, test fixtures, ISO 7500‑1.

ISO 14589:2000

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

ISO 7500-1:1999

Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing m…

SIST EN ISO 7500-1:2018

Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compr…

SIST EN ISO 14589:2002

Blind rivets - Mechanical testing (ISO 14589:2000)