ISO 14592-1:2002
Water quality — Evaluation of the aerobic biodegradability of organic compounds at low concentrations — Part 1: Shake-flask batch test with surface water or surface water/sediment suspensions
Water quality — Evaluation of the aerobic biodegradability of organic compounds at low concentrations — Part 1: Shake-flask batch test with surface water or surface water/sediment suspensions
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 27
- Дата публикации:
- 19 ноября 2002 г.
- Издание:
- ISO IS 14592 edition 1 version 1
- ICS:
- 13.060.70
ISO 14592-1:2002 specifies a test method for evaluating the biodegradability of organic test compounds by aerobic microorganisms in surface waters by means of a shake-flask batch test with suspended biomass. It is applicable to natural surface water, free from coarse particles to simulate a pelagic environment (pelagic test) or to surface water with suspended solids or sediments added to obtain a level of 0,1 g/l to 1 g/l dry mass (suspended sediment test) to simulate a water-to-sediment interface or a water body with resuspended sediment material. ISO 14592-1:2002 is applicable to organic test compounds present in lower concentrations (normally below 100 micrograms per litre) than those of natural carbon substrates also present in the system. Under these conditions, the test compounds serve as a secondary substrate and the kinetics for biodegradation would be expected to be first order (non-growth kinetics). This test method is not recommended for use as proof of ultimate biodegradation which is better assessed using other standardized tests. It is also not applicable to studies on metabolite formation and accumulation which require higher test concentrations.
Abstract
Overview
ISO 14592-1:2002 specifies a laboratory shake‑flask batch test to evaluate the aerobic biodegradability of organic compounds at low concentrations in natural surface waters, with or without suspended sediments. The method simulates either a pelagic environment (surface water free from coarse particles) or a water-to-sediment interface (surface water with added sediment at 0.1–1 g/L dry mass). It is intended for test compound concentrations normally below 100 µg/L, where the compound behaves as a secondary substrate and degradation follows first‑order (non‑growth) kinetics.
Key topics and requirements
- Test system: Shake‑flask batch incubation of surface water or surface water/sediment suspensions under aerobic conditions with mechanical agitation at environmental temperature.
- Concentration range: Designed for low concentrations (typically
Технические детали
- Технический комитет
- ISO/TC 147/SC 5 - Biological methods
- SKU
- ISO 14592-1:2002
Похожие стандарты
Другие стандарты ISO
ISO 8212:1986
ОтменёнSoaps and detergents — Techniques of sampling during manufacture
Overview Standard Reference: ISO 8212:1986 Title: Soaps and detergents - Techniques of sampling during manufacture ISO 8212:1986 defines standardized techniques for taking representative samples of s…
ISO 20662:2020
ДействующийShips and marine technology — Hopper dredger supervisory and control systems
Overview ISO 20662:2020 - Ships and marine technology: Hopper dredger supervisory and control systems (HD‑SCS) - specifies the components, structure, general requirements, and functional requirements…
ISO 3021:2023
ДействующийAdventure tourism — Hiking and trekking activities — Requirements and recommendations
Overview ISO 3021:2023 - Adventure tourism: Hiking and trekking activities - Requirements and recommendations defines safety-focused requirements and recommendations for hiking and trekking offered a…
ISO 3826-2:2008
ДействующийPlastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…
Overview ISO 3826-2:2008 - "Plastics collapsible containers for human blood and blood components - Part 2: Graphical symbols for use on labels and instruction leaflets" defines a system of internatio…
ISO/IEC 24730-1:2014
ДействующийInformation technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)
Overview ISO/IEC 24730-1:2014 specifies the Application Programming Interface (API) for Real‑Time Locating Systems (RTLS). The standard defines a minimal, interoperable boundary that lets application…
ISO 8668-5:1992
ДействующийAircraft — Terminal junction systems — Part 5: Detail specification for type 3 system
Overview - ISO 8668-5:1992 (Aircraft terminal junction systems, Type 3) ISO 8668-5:1992 defines the detail specification for Type 3 Terminal Junction Systems (TJS) used in aircraft electrical install…
ISO 7574-3:1985
ДействующийAcoustics — Statistical methods for determining and verifying stated noise emission values of machinery and e…
Overview ISO 7574-3:1985 is part of the ISO 7574 series on acoustics and provides a simple (transition) statistical method for determining and verifying stated noise emission values for batches (lots…
ISO 15638-15:2014
ДействующийIntelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TAR…
Overview - ISO 15638-15:2014 (Vehicle location monitoring, TARV) ISO 15638-15:2014 is part of the ISO 15638 suite for Intelligent Transport Systems (ITS) and defines the framework and data specificat…