ISO 1520:2006

Overview

ISO 1520:2006 - Paints and varnishes - Cupping test specifies an empirical test method to assess a coating’s resistance to cracking and/or detachment from a metal substrate when the coated panel is gradually deformed by indentation. The method can be applied to single or multi-coat systems either as a pass/fail test at a specified indentation depth or to determine the minimum indentation depth that causes coating failure.

Key topics and technical requirements

• Principle: A hemispherical indenter pushes a coated flat metal panel into a drawing die to form a dome; coating is inspected for cracking or detachment.
• Apparatus: Drawing die and retaining ring (plane-polished), and a hardened polished hemispherical indenter 20 mm diameter. Indenter travel must stay within 0.1 mm of die axis; rotational movement is prevented.
• Test speed and measurement: Indenter rate 0.1–0.3 mm/s. Depth measured to 0.1 mm; panel thickness to 0.01 mm.
• Test panels: Rectangular metal panels, thickness 0.3–1.25 mm. Indentation centers ≥ 35 mm from edges and ≥ 70 mm apart. Coating thickness measured per ISO 2808.
• Conditioning: Unless agreed otherwise, condition coated panels at (23 ± 2) °C and (50 ± 5) % RH for at least 16 h before testing. Tests are carried out in duplicate.
• Result reporting: Report pass/fail at specified depth or the mean maximum depth (mean of two valid results) to 0.1 mm. Specify whether visual inspection used normal corrected vision or magnification (×10).
• Precision: Repeatability r = ±1 mm; reproducibility R = ±2 mm (95 % probability).
• Test report: Must identify product, reference ISO 1520:2006, supplementary conditions (substrate, application, drying, thickness), apparatus type, deviations and anomalies, and date.

Applications and users

ISO 1520 is used for:

• Quality control and acceptance testing of paints, varnishes and related coatings on metal substrates.
• Comparative performance testing during formulation development.
• Verification of coating resistance for manufacturers, coatings laboratories, OEMs, specifiers, and corrosion-protection engineers.
• Contractual or regulatory compliance where a cupping deformation resistance requirement is specified.

Keywords: ISO 1520, cupping test, paint testing, coating adhesion, resistance to cracking, metal substrate, indentation test, coating performance.

Related standards

• ISO 1513, ISO 1514, ISO 15528, ISO 2808 (normative references for sampling, panels and film thickness).
• Other deformation/impact tests in the same family: ISO 1519 (bend test), ISO 6272‑1/‑2 (impact / falling-weight tests), ISO 6860 (conical mandrel), ISO 17132 (T-bend).