ISO 16276-1:2007

Overview

ISO 16276-1:2007 defines a standardized procedure for assessing the fracture strength (adhesion/cohesion) of protective paint coatings on steel structures using pull-off testing. Intended for coatings on steel substrates of at least 10 mm thickness, this part specifies suitable equipment, inspection areas, sampling plans and acceptance/rejection criteria, but does not provide numeric fracture-strength values. The standard emphasizes that results from different pull-off devices are not directly comparable, so the test equipment and manufacturer should be specified in contract documentation.

Keywords: ISO 16276-1, pull-off testing, fracture strength, adhesion, cohesion, protective paint systems, steel structures, acceptance criteria

Key topics and technical requirements

• Scope: Assessment of fracture strength for coatings of any thickness on steel ≥ 10 mm; test-panels or sandwich techniques referenced for thinner substrates.
• Terminology: Introduces “fracture strength” to cover both adhesion (coat–substrate) and cohesion (within a coat).
• Test principle: Fix test cylinders (dollies) to the coating with adhesive, apply perpendicular tensile force until fracture; measure the force.
• Apparatus & consumables:
  • Tensile/pull-off apparatus (manufacturer and model must be agreed/specifed).
  • Dollies (typically ~20 mm diameter; stainless steel or aluminium; length ≥ half diameter).
  • Adhesives suitable for the coating (e.g., 2-pack epoxy, 1-pack cyanoacrylate).
  • Circular cutting device for isolating the test area.
• Procedural controls:
  • Calibration of measurement equipment is required.
  • Force must be applied uniformly, ≤ 1 MPa/s, with fracture occurring within 90 s.
  • Coating cure: follow manufacturer; otherwise dry/cure ≥ 10 days at substrate temperature >15 °C and RH