ISO 16365-2:2014

Name: ISO 16365-2:2014 — Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
SKU: ISO 16365-2:2014
Price: 18000 RUB
Availability: InStock

Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties

Название (английский):

ISO 16365-2:2014

Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 28 апреля 2014 г.
Издание:: ISO IS 16365 edition 1 version 1
ICS:: 83.080.20

Тип поставки:

Full version18 000 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:18 000 ₽

Описание (английский):

ISO 16365-2:2014 specifies the methods of preparation of test specimens and the standard test methods to be used in determining the properties of thermoplastic polyurethane moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are also given.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 16365-2:2014 defines standardized methods for the preparation of test specimens and the determination of properties of thermoplastic polyurethanes (TPU) intended for moulding and extrusion. The standard covers specimen preparation, handling and conditioning of test material, injection‑moulding practice for test specimens, and the environmental/test conditions required to obtain reproducible, comparable TPU property data.

Key topics and technical requirements

Material handling and moisture control

Granules must reach room temperature and have a moisture content ≤ 0.02 % (m/m).
Drying: dehumidified air dryer recommended (e.g., 3 h at 100 °C may be sufficient); circulating‑air ovens require ~+20 °C. Longer drying (up to 1 day at 110 °C) is permitted if proven.
Use of premixes is recommended when adding masterbatches or pigments. Store granules in moisture‑proof containers and minimize exposure to air; blanketing in the feed hopper with dry gas (dry air, N2, Ar) or using a dehumidifier hopper drier is advised.

Specimen preparation and injection moulding

Specimens shall be prepared by injection moulding in accordance with ISO 294-1 and related parts.
Recommended processing temperature ranges vary by Shore D hardness (examples):
- Soft (D < 25): heating zone ~200–220 °C; nozzle ~210–230 °C; melt ~205–225 °C.
- Medium (25 ≤ D < 65) and Rigid (D ≥ 65) have higher ranges accordingly.
Typical pressures: injection 10–100 MPa; holding 10–100 MPa; back pressure 0.5–2 MPa.
Melt flow guidance: target MFR/MVR in the range 5–100 cm3/10 min, preferably 10–40 cm3/10 min (see ISO 1133-2).

Conditioning

TPUs may need annealing to reach full mechanical properties; recommended annealing 20 h at 100 °C.
After annealing, specimens can be tested following 24 h storage at 23 °C and 50 % RH.
Standard testing atmosphere: 23 ± 2 °C and 50 ± 10 % RH unless otherwise stated.

Test reproducibility

To ensure comparable data use the specified preparation, specimen dimensions and test procedures. Differences in mechanical properties due to flow direction should be reported if > 5 %.

Applications and users

Intended for materials and process engineers, QA/test laboratories, compounders, TPU manufacturers, and OEMs who need reliable, comparable property data for:

Material specification and certification
Comparative evaluation of TPU grades (polyether and polyester TPUs)
Quality control of moulding and extrusion batches
Data for design decisions where TPU mechanical, thermal, electrical or biological resistance properties matter

Related standards

Normative references include: ISO 16365-1, ISO 10350-1, ISO 294 (parts 1,3,4), ISO 1133-2, ISO 291, ISO 868, ISO 527, ISO 1183, ISO 15512, and several IEC methods for electrical and flammability testing. These referenced standards should be consulted for detailed test methods and specimen geometries.

Keywords: ISO 16365-2, TPU, thermoplastic polyurethane, test specimens, injection moulding, conditioning, annealing, moisture content, MFR, MVR, Shore D hardness.

ISO 16365-2:2014

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

SIST EN ISO 294-1:2017

Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and…

SIST EN ISO 1133-2:2012

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -…

BS ISO 16365-1:2025-TC

Tracked Changes. Plastics. Thermoplastic polyurethanes for moulding and extrusion. Designation system and bas…

SIST EN ISO 10350-1:2025

Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 103…

BS EN ISO 29470:2020

Thermal insulating products for building applications. Determination of the apparent density.

BS ISO 2910:2018

Cinematography. Screen luminance and chrominance for the projection of film motion pictures.

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

SIST EN ISO 527-2:2025

Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics…