ISO 21420:2020
Protective gloves — General requirements and test methods
Protective gloves — General requirements and test methods
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 24
- Дата публикации:
- 17 февраля 2020 г.
- Издание:
- ISO IS 21420 edition 1 version 1
- ICS:
- 13.340.40
This document specifies the general requirements and relevant test procedures for glove design and construction, innocuousness, comfort and efficiency, as well as the marking and information supplied by the manufacturer applicable to all protective gloves. It can also apply to arm protectors and gloves permanently incorporated in containment enclosures. Gloves and hand protectors such as mittens, pot holders and arm protection are covered by this document. This document does not address the protective properties of gloves and therefore is not used alone but only in combination with the appropriate specific standard(s). A non-exhaustive list of these standards is given in the Bibliography.
Abstract
Overview
ISO 21420:2020 - Protective gloves - General requirements and test methods is the ISO reference standard that sets out the general design, construction, innocuousness, comfort and marking requirements for all protective gloves. It applies to hand protectors such as mittens, pot holders, arm protectors and gloves permanently incorporated in containment enclosures. ISO 21420:2020 is a baseline standard and does not itself specify protective properties (e.g., cut, chemical or heat resistance); it is intended to be used in combination with relevant specific standards.
Key topics and technical requirements
ISO 21420 defines general requirements and test methods for glove safety, including:
- Design and construction: gloves must allow the wearer to perform tasks normally while providing appropriate protection; construction and seam strength must not significantly degrade overall performance. Reusable multilayer gloves must be doffable without layer separation.
- Innocuousness (material safety): materials shall not release substances known to be toxic, carcinogenic, mutagenic, allergenic, corrosive or irritating under foreseeable use.
- Specified material limits and tests:
- Chromium(VI) in leather:
Технические детали
- Технический комитет
- ISO/TC 94/SC 13 - Protective clothing
- SKU
- ISO 21420:2020
Похожие стандарты
Другие стандарты ISO
ISO 8212:1986
ОтменёнSoaps and detergents — Techniques of sampling during manufacture
Overview Standard Reference: ISO 8212:1986 Title: Soaps and detergents - Techniques of sampling during manufacture ISO 8212:1986 defines standardized techniques for taking representative samples of s…
ISO 20662:2020
ДействующийShips and marine technology — Hopper dredger supervisory and control systems
Overview ISO 20662:2020 - Ships and marine technology: Hopper dredger supervisory and control systems (HD‑SCS) - specifies the components, structure, general requirements, and functional requirements…
ISO 3021:2023
ДействующийAdventure tourism — Hiking and trekking activities — Requirements and recommendations
Overview ISO 3021:2023 - Adventure tourism: Hiking and trekking activities - Requirements and recommendations defines safety-focused requirements and recommendations for hiking and trekking offered a…
ISO 3826-2:2008
ДействующийPlastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…
Overview ISO 3826-2:2008 - "Plastics collapsible containers for human blood and blood components - Part 2: Graphical symbols for use on labels and instruction leaflets" defines a system of internatio…
ISO/IEC 24730-1:2014
ДействующийInformation technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)
Overview ISO/IEC 24730-1:2014 specifies the Application Programming Interface (API) for Real‑Time Locating Systems (RTLS). The standard defines a minimal, interoperable boundary that lets application…
ISO 8668-5:1992
ДействующийAircraft — Terminal junction systems — Part 5: Detail specification for type 3 system
Overview - ISO 8668-5:1992 (Aircraft terminal junction systems, Type 3) ISO 8668-5:1992 defines the detail specification for Type 3 Terminal Junction Systems (TJS) used in aircraft electrical install…
ISO 7574-3:1985
ДействующийAcoustics — Statistical methods for determining and verifying stated noise emission values of machinery and e…
Overview ISO 7574-3:1985 is part of the ISO 7574 series on acoustics and provides a simple (transition) statistical method for determining and verifying stated noise emission values for batches (lots…
ISO 15638-15:2014
ДействующийIntelligent transport systems — Framework for cooperative telematics applications for regulated vehicles (TAR…
Overview - ISO 15638-15:2014 (Vehicle location monitoring, TARV) ISO 15638-15:2014 is part of the ISO 15638 suite for Intelligent Transport Systems (ITS) and defines the framework and data specificat…