ISO 21760-1:2019

Name: ISO 21760-1:2019 — Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 1: Adhesive film preparation methods
SKU: ISO 21760-1:2019
Price: 25 EUR
Availability: InStock

Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 1: Adhesive film preparation methods

Название (английский):

ISO 21760-1:2019

Adhesives for organic electronic devices — Determination of water vapour transmission rate — Part 1: Adhesive film preparation methods

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 22 мая 2019 г.
Издание:: ISO IS 21760 edition 1 version 1
ICS:: 83.180

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

This document specifies six methods for determining the water vapour transmission rate of adhesive films coated on a plastic substrate. The adhesive is used in organic electronic devices such as organic light-emitting diodes. The methods provide rapid measurement over a wide range of water vapour transmission rates.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 21760-1:2019 specifies adhesive film preparation methods for determining the water vapour transmission rate (WVTR) of adhesives used in organic electronic devices (for example, organic light‑emitting diodes, OLEDs). The standard defines how to prepare non‑self‑supporting adhesive films coated on plastic substrates and describes the experimental approach needed to obtain rapid WVTR measurements across a wide range of permeation rates.

Key topics and technical requirements

Scope: Six measurement methods for WVTR of adhesive films coated on plastic substrates; aimed at adhesives/seal materials for organic electronic devices.

Specimens: Non‑self‑supporting adhesive films are applied to plastic substrates (e.g., PET). Substrate thickness options specified: 12, 25, 50 or 100 µm.

Adhesive thickness: Total dry film thickness range 3 µm to 60 µm (recommended values: 5, 10, 20, 50 µm).

Coating methods described: Annex A (spin coating), Annex B (blade coating), Annex C (spray coating).

Conditioning: Specimens conditioned at 23 ± 2 °C and 50 ± 5 % RH unless otherwise agreed.

Number of specimens: Typically three specimens per test.

Thickness determination: Adhesive thickness may be determined by calculation (from application rate and non‑volatile content per ISO 3233‑1) or by optical/mechanical methods (ISO 4593, ISO 2808).

Test principle: WVTR of the adhesive cannot be measured directly for non‑self‑supporting films; measure WVTR of substrate+adhesive and substrate alone, then calculate the adhesive WVTR by accounting for the substrate contribution (reciprocal subtraction approach).

Measurement methods (ISO 15106 series): Six detection techniques are referenced - humidity sensor, infrared, electrolytic, gas chromatography, pressure sensor, and atmospheric pressure ionization mass spectrometry - with guidance on method selection by sensitivity, WVTR magnitude, and specimen fragility.

Applications and users

Primary users: Adhesive manufacturers, coating/process engineers, quality control and test laboratories, and device integrators in the organic electronics and flexible electronics industries.

Practical applications:

Verifying barrier/sealant performance for OLEDs and other water‑sensitive organic electronic devices.
Comparing coating methods (spin, blade, spray) and formulation choices (resins, multi‑layer films, desiccant‑loaded layers).
Supporting materials selection, process optimization, reliability testing, and supplier qualification for low‑WVTR sealing solutions.

Related standards

ISO 15106 (all parts) - WVTR measurement methods (1 to 6)

ISO 4593, ISO 2808 - thickness determination of films/sheets

ISO 3233‑1 - determination of non‑volatile content (for dry film thickness calculation)

Keywords: ISO 21760-1:2019, WVTR, water vapour transmission rate, adhesives for organic electronic devices, adhesive film preparation, spin coating, blade coating, spray coating, PET substrate, OLED barrier testing.

ISO 21760-1:2019

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

BS EN ISO 3233-1:2019

Paints and varnishes. Determination of percentage volume of non-volatile matter. Method using a coated test p…

ISO 4593:1993

Plastics — Film and sheeting — Determination of thickness by mechanical scanning

BS EN ISO 2808:2019

Paints and varnishes. Determination of film thickness.

ISO 15106-4:2008

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 4: Gas-chromatographic…