ISO 22915-22:2014

Name: ISO 22915-22:2014 — Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking trucks with and without elevating operator position
SKU: ISO 22915-22:2014
Price: 18000 RUB
Availability: InStock

Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking trucks with and without elevating operator position

Название (английский):

ISO 22915-22:2014

Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking trucks with and without elevating operator position

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 16 декабря 2014 г.
Издание:: ISO IS 22915 edition 1 version 1
ICS:: 53.060

Тип поставки:

Full version18 000 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:18 000 ₽

Описание (английский):

ISO 22915-22:2014 specifies the tests to verify the stability of lateral- and front-stacking trucks, as defined in ISO 5053-1, with and without elevating operator position. It applies to trucks fitted with fork arms, shuttle forks, and/or integrated attachments under normal operating conditions. It applies to trucks fitted with a load carrier that can be shifted laterally or pivoted out of the longitudinal centre plane of the truck.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 22915-22:2014 specifies laboratory tests to verify the stability of lateral- and front-stacking industrial trucks, with and without an elevating operator position. It applies to trucks defined by ISO 5053-1 that are fitted with fork arms, shuttle forks and/or integrated attachments and to trucks with a load carrier that can be shifted laterally or pivoted out of the truck’s longitudinal centre plane. The standard defines test conditions, tilt‑table positioning and pass/fail criteria to assess rollover and tipping risk under normal indoor operating conditions.

Key topics and technical requirements

Scope of testing: Stability verification for lateral- and front-stacking trucks (Tests 1–7) under different load, lift height and steering conditions.

Test setup and positioning: Detailed requirements for placing the truck on a tilt table (see Clauses 4.2.2–4.2.4), including definitions of load and drive/steer axles and special points (M and N) used for lateral tests across various wheel and steering configurations.

Lift height measurement: Lift heights are measured from the tilt table to the uppermost point of the load‑carrying surface (Clause 4.3).

Steering modes and tilt angles: Stability criteria vary by steering mode - guided, restricted and unrestricted - and by travel speed (v, km/h). The standard specifies required tilt‑table angles and, for some tests, uses formulas that relate allowable tilt angle to truck speed and lift height.

Load conditions: Tests cover trucks with and without test loads and consider the least‑stable load‑carrier positions (extended, transport, laterally displaced). Combinations of lift height, load and maximum travel speed that produce worst‑case stability are used to determine compliance.

Test matrix: A tabulated verification matrix (Table 1) identifies which tests apply for longitudinal leading/trailing loads and lateral conditions, and whether load/no‑load conditions are required.

Applications

Manufacturers of lateral- and front-stacking trucks use ISO 22915-22 to design and validate stability performance and to support type‑approval and safety declarations.

Independent test laboratories and conformity assessment bodies apply the standard to verify compliance prior to market entry.

Fleet managers, safety engineers and procurement professionals use the criteria to compare equipment safety and select trucks suitable for indoor stacking operations, especially where load carriers move laterally or operator platforms elevate.

Regulatory and workplace safety authorities reference the standard when assessing risks related to truck tipping and operator elevation.

Related standards

ISO 5053-1 - Powered industrial trucks: terminology and classification

ISO 22915-1 - Verification of stability: General requirements

ISO 3691-3 - Additional safety requirements for trucks with elevating operator position

Keywords: ISO 22915-22, industrial trucks stability, lateral-stacking trucks, front-stacking trucks, elevating operator position, tilt table test, forklift stability test, load carrier lateral displacement.

ISO 22915-22:2014

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications

Related standards

Технические детали

BS ISO 5053-1:2015

Industrial trucks. Terminology and classification - Types of industrial trucks

BS ISO 22915-22:2014

Industrial trucks. Verification of stability. Lateral- and front-stacking trucks with and without elevating o…

BS ISO 22915-13:2026

Industrial trucks. Verification of stability. Rough-terrain trucks with mast.

ISO 3691-3:2016

Industrial trucks — Safety requirements and verification — Part 3: Additional requirements for trucks with el…