ISO 3451-1:2019

Name: ISO 3451-1:2019 — Plastics — Determination of ash — Part 1: General methods
SKU: ISO 3451-1:2019
Price: 25 EUR
Availability: InStock

Plastics — Determination of ash — Part 1: General methods

Название (английский):

ISO 3451-1:2019

Plastics — Determination of ash — Part 1: General methods

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 6 февраля 2019 г.
Издание:: ISO IS 3451 edition 5 version 1
ICS:: 83.080.01

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

This document specifies general methods, with suitable test conditions, for the determination of the ash of a range of plastics. The particular conditions chosen can be included in the specifications for the plastic material in question. Particular conditions applicable to poly(alkylene terephthalate) materials, unplasticized cellulose acetate, polyamides and poly(vinyl chloride) plastics, including some specific filled, glass-fibre-reinforced and flame-retarded materials, are specified in ISO 3451-2, ISO 3451-3, ISO 3451-4 and ISO 3451-5.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 3451-1:2019 - Plastics - Determination of ash - Part 1: General methods defines standardized laboratory procedures for measuring the ash content of plastics. The standard describes four principal approaches (direct calcination, two variants of sulfation, and an automated instrument method) and sets out test conditions, apparatus, sample sizing guidance and reporting requirements to obtain reproducible ash results across a range of polymer types.

Key topics and technical requirements

Methods A–D:

Method A (Direct calcination) - burning/char and calcination in a muffle furnace (includes a “rapid ashing” option if demonstrated equivalent).
Method B (Sulfation after burning) - convert inorganic residue to sulfates with concentrated H2SO4 after burning (produces “sulfated ash”).
Method C (Sulfation before burning) - mix with H2SO4 and heat so fuming/burning occurs; used when volatile metal halides might be lost during burning (not applicable to silicones or fluorine-containing polymers).
Method D (Automated instrument) - fully automatic instruments integrating drying, ashing, weighing and continuous mass/temperature recording.

Final calcination temperatures - select one of the specified ranges for the final step, unless otherwise required: (600 ± 25) °C, (750 ± 50) °C, (850 ± 50) °C or (950 ± 50) °C. The ash mass can vary with calcination temperature (e.g., carbonate decomposition).

Test portion sizing - guidance provided to choose sample mass to yield approximately 5–500 mg of ash; a preliminary test is recommended if ash content is unknown.

Accuracy & repeatability - calcination is repeated until two consecutive weighings differ by ≤ 0.5 mg (constant mass). Analytical balance accuracy of 0.1 mg is specified.

Apparatus & safety - crucibles (silica, porcelain, quartz, etc.), muffle furnace, gas burner, fume hood, and appropriate handling of concentrated sulfuric acid (98%) with warnings and ventilation requirements.

Laboratory controls - periodic furnace calibration traceable to national standards and ventilation efficiency checks are required for consistent results.

Applications and who uses it

ISO 3451-1:2019 is used by:

Polymer and plastics testing laboratories for routine ash quantification.

Quality control teams in plastics manufacturing to monitor filler, mineral content or residue levels.

Materials engineers and R&D for formulation development and comparison of additives, fillers and flame retardants.

Regulatory and certification bodies requiring standardized compositional data.

Recycling and waste characterization to assess inorganic content that affects processing.

Practical uses include verifying filler loading, confirming removal of organic components, evaluating flame‑retardant or mineral additive levels, and ensuring product specifications reference a defined ash-test method.

Related standards

ISO 3451-2, ISO 3451-3, ISO 3451-4 and ISO 3451-5 - specify particular conditions for specific polymer families (e.g., poly(alkylene terephthalate), cellulose acetate, polyamides, PVC and certain filled or flame-retarded materials).

Keywords: ISO 3451-1:2019, plastics ash determination, calcination, sulfated ash, muffle furnace, automated ash analyzer, ash content test, polymer testing, sulfuric acid sulfation.

ISO 3451-1:2019

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

ISO 3451-2:1998

Plastics — Determination of ash — Part 2: Poly(alkylene terephthalate) materials

ISO 3451-3:1984

Plastics — Determination of ash — Part 3: Unplasticized cellulose acetate

BS EN ISO 3451-4:2024

Plastics. Determination of ash. Polyamides.

BS EN ISO 3451-5:2025

Plastics. Determination of ash. Poly(vinyl chloride).