ISO 5184:1979

Overview

ISO 5184:1979 defines requirements for straight resistance spot welding electrodes, focusing on physical dimensions, tolerances, designation, material selection and marking. The standard applies only to straight electrodes used for spot welding when the electrode force does not exceed the specified Fmax for the electrode diameter (d1) and when the electrode centre lines are perpendicular to the workpiece. ISO 5184 replaces earlier ISO/R recommendations and supports consistent production and safe use of spot welding electrodes.

Key Topics

• Dimensions and tolerances: The standard specifies dimensional profiles, gauge planes and permissible tolerances for straight electrodes to ensure interchangeability between manufacturers and machines.
• Designation: Examples in the standard show how to designate electrodes by type, diameter (d1), projected length (l5) and material. Example designations include:
  • [ISO 5184](/search?q=ISO%205184) A 16 x 25 - A 2/2 (Type A, d1 = 16 mm, l5 = 25 mm, material A 212)
  • [ISO 5184](/search?q=ISO%205184) FL 16 x 25 - A 2/2 (Type F, long flat, same dimensions and material)
• Material: Electrode materials are referenced to ISO 5182 (materials for resistance welding electrodes). Material selection is important for electrical and thermal performance and wear resistance.
• Marking: Electrodes must be marked with the full designation specified in the standard. Where space is limited, marking the material is acceptable. The standard clarifies the required content of markings and exceptions.
• Operational limits: The standard explicitly limits its application to electrodes used under the Fmax force value associated with the electrode diameter (d1) and to applications where electrodes are perpendicular to the workpiece.

Applications

ISO 5184 is intended for engineers, quality managers and procurement teams involved in resistance spot welding who require:

• Interchangeable electrodes across machines and suppliers, reducing downtime and simplifying inventories.
• Consistent manufacturing and inspection criteria for electrode dimensions and tolerances.
• Clear product designation and marking, enabling traceability and correct material selection at the point of use.
• Safety and reliability by ensuring electrodes are used within specified force limits and geometry constraints.

Typical use cases include automotive spot welding fixtures, industrial resistance welding cells and maintenance/repair of welding equipment where straight electrodes are standard.

Related Standards

• ISO 5182 - Materials for resistance welding electrodes and ancillary equipment (referenced for material specifications).
• ISO 1089 - Conical electrode shanks for spot welding machines (dimensioning of shanks and fittings).

For implementation, use ISO 5184 together with machine manufacturer guidance and the material specifications of ISO 5182 to select electrodes that meet both dimensional and performance requirements while staying within the specified Fmax and perpendicular alignment conditions.