ISO 6157-1:1988
Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 9
- Дата публикации:
- 28 июля 1988 г.
- Издание:
- ISO IS 6157 edition 1 version 1
- ICS:
- 21.060.10
Establishes limits for various types of products and applies also to these products with: nominal thread diameters of 5 mm and larger, product grades A und B, property classes up to and including 10.9; the annex contains a sampling plan.
Abstract
Overview
ISO 6157-1:1988 - "Fasteners - Surface discontinuities - Part 1: Bolts, screws and studs for general requirements" defines permissible surface discontinuities and inspection principles for bolts, screws and studs used in general applications. It applies to fasteners with nominal thread diameters of 5 mm and larger, product grades A and B, and property classes up to and including 10.9. The standard establishes limits for defects (cracks, bursts, seams, voids, folds, tool marks, damages) and includes an annex sampling plan for acceptance inspection.
Key topics and technical requirements
- Scope and applicability: Covers bolts, screws and studs for general requirements; special or tighter limits (e.g., for automatic assembly) are covered in ISO 6157-3 or must be specified by purchaser/product standard.
- Types of surface discontinuities: Descriptions and causes of
- Cracks (including quench cracks - expressly not permitted in any location)
- Forging cracks and bursts and shear bursts
- Seams and laps (raw material defects)
- Voids (non-filled pockets from forging/upsetting)
- Folds
- Tool marks
- Damages (dents, nicks, scrapes)
- Quantitative limits (examples given in the standard):
- Voids: depth h
Технические детали
- Технический комитет
- ISO/TC 2/SC 7 - Reference standards
- SKU
- ISO 6157-1:1988
Похожие стандарты
Упомянутые в описании и другие стандарты ISO