ISO 6460-2:2014
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 71
- Дата публикации:
- 24 ноября 2014 г.
- Издание:
- ISO IS 6460 edition 2 version 1
- ICS:
- 13.040.50
ISO 6460-2:2014 defines test cycles for measurement for the gaseous exhaust emissions from motorcycles, as well as for determining the fuel consumption of motorcycles as defined in ISO 3833, equipped with a spark ignition engine (four-stroke engine, two-stroke engine, or rotary piston engine) or a compression ignition engine. The test cycle 1 is equivalent to the test cycle specified in the European Union Commission Directive 2003/77/EC[6] and the test cycle 2 is equivalent to the test cycle specified in global technical regulations No.2 (WMTC), United Nations Economic Commission for Europe, ECE/TRANS/180/Add.2[9]. A selection of other test cycles adopted or to be adopted by several countries is described in Annex C for information purpose.
Abstract
Overview
ISO 6460-2:2014 - Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions - defines standardized test cycles and specific test conditions for measuring gaseous exhaust emissions and fuel consumption of motorcycles (as defined in ISO 3833). It applies to motorcycles with spark‑ignition engines (four‑stroke, two‑stroke, rotary piston) and compression‑ignition engines. Test Cycle 1 corresponds to the EU Directive 2003/77/EC (UDC/EUDC) and Test Cycle 2 corresponds to the Global Technical Regulation No.2 (WMTC). Annex C describes other nationally adopted cycles for information.
Key topics and technical requirements
- Defined test cycles: Urban Driving Cycle (UDC) and Extra‑Urban Driving Cycle (EUDC) sequences for chassis dynamometer testing; distinctions for motorcycles
Технические детали
- Технический комитет
- ISO/TC 22/SC 38 - Motorcycles and mopeds
- SKU
- ISO 6460-2:2014
Похожие стандарты
Упомянутые в описании и другие стандарты ISO