ISO 6460-3:2007

Name: ISO 6460-3:2007 — Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed
SKU: ISO 6460-3:2007
Price: 25200 RUB
Availability: InStock

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed

Название (английский):

ISO 6460-3:2007

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel consumption measurement at a constant speed

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 23 июля 2007 г.
Издание:: ISO IS 6460 edition 1 version 1
ICS:: 13.040.50

Тип поставки:

Full version25 200 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:25 200 ₽

Описание (английский):

ISO 6460-3:2007 specifies the methods of measurement for fuel consumption at a constant speed on the road and on the chassis dynamometer. It is applicable to motorcycles as defined in ISO 3833 equipped with a spark ignition engine (four-stroke engine, two-stroke engine or rotary piston engine) or a compression ignition engine.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 6460-3:2007 defines a standardized method to measure motorcycle fuel consumption at a constant speed, applicable both on the road and on a chassis dynamometer. It covers motorcycles (per ISO 3833) equipped with spark-ignition engines (four-stroke, two-stroke, rotary) or compression-ignition engines. The part is used together with ISO 6460‑1:2007 (general test requirements) and specifies test procedures, measurement tolerances and result presentation for reproducible fuel-consumption data.

Key topics and technical requirements

Test modes: Road test and chassis dynamometer test (set-up per ISO 11486).

Measurement systems: Fuel flow meter or carbon balance method (on dynamometer). Fuel supply measuring accuracy: ±1%.

Test speed control: Road tests require speed within ±2 km/h of the target; dynamometer tests within ±1 km/h.

Test repetitions: Minimum three tests; mean values calculated and rounded to one decimal place.

Test section: Test run must consume >10 mL fuel or be >300 m in length; road section length measured to ±0.1%.

Rider and loading: Rider mass 75 kg ±5 kg, height 1.75 m ±0.05 m, seated in a defined position; total test mass (rider + instruments) measured before testing.

Environmental limits: Wind and ambient conditions controlled - e.g., max steady wind 3 m/s, gust 5 m/s, air temperature 278 K to 308 K, relative humidity ≤95%. Relative air density must be within ±7.5% of reference.

Fuel temperature and switching: When volumetric systems are used, fuel temperature must be measured; switching to the measuring supply must occur within 0.2 s.

Result reporting: Presentation format and calculation methods provided (Annex A and Annex B).

Applications and who uses it

ISO 6460-3 is intended for:

Motorcycle manufacturers and powertrain engineers validating fuel efficiency and drivetrain development.

Accredited testing laboratories performing homologation, certification or R&D fuel-consumption tests.

Regulatory bodies and type-approval authorities requiring repeatable, comparable fuel consumption data.

Emissions and environmental analysts pairing fuel-consumption data with gaseous exhaust measurements.

Practical benefits include improved comparability of fuel-economy figures across vehicles and test platforms, repeatable lab-to-road correlation, and a clear protocol for both development testing and regulatory compliance.

Related standards

ISO 6460-1:2007 - General test requirements for gaseous exhaust emissions and fuel consumption.

ISO 11486 - Methods for setting running resistance on a chassis dynamometer.

ISO 3833 - Vehicle classification (motorcycle definitions).

ISO 7117 - Measurement of maximum speed (referenced for related speed testing).

Keywords: ISO 6460-3:2007, motorcycle fuel consumption, constant speed test, chassis dynamometer, road test, carbon balance, fuel flow meter, test procedure.

ISO 6460-3:2007

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

ISO 6460-1:2007

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 1: General test re…

BS ISO 3833:1977

Road vehicles. Types. Terms and definitions.

BS ISO 11486:2006+A1:2012

Motorcycles. Methods for setting running resistance on a chassis dynamometer.

BS ISO 7117:2010

Motorcycles. Measurement method for determining maximum speed