ISO 7526:2020

Name: ISO 7526:2020 — Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
SKU: ISO 7526:2020
Price: 21600 RUB
Availability: InStock

Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion

Название (английский):

ISO 7526:2020

Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 12
Дата публикации:: 4 марта 2020 г.
Издание:: ISO IS 7526 edition 2 version 1
ICS:: 77.100

Тип поставки:

Full version21 600 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:21 600 ₽

Описание (английский):

This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the sulfur content in ferronickels in the range of 0,002 % to 0,12 %. The method is applicable to normal production operations. It uses commercially available equipment, which is calibrated using steel and/or ferronickel certified reference materials (CRMs).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 7526:2020 specifies an infrared absorption method after induction furnace combustion for the determination of sulfur content in ferronickels in the range 0,002 % to 0,12 % (mass fraction). Intended for normal production operations, the method uses commercially available sulfur analysers and induction furnace systems calibrated with steel and/or ferronickel certified reference materials (CRMs).

Key Topics

Principle: Combustion of a test portion in a high‑frequency induction furnace in a pure oxygen stream converts sulfur to SO2, which is measured by infrared absorption.

Analytical range: 0,002 % to 0,12 % sulfur in ferronickel.

Reagents & gas: High‑purity oxygen (≥ 99,5 %); CO2 and moisture absorbents (attapulgus clay, Mg(ClO4)2); glass‑wool filters; fluxes and accelerators with low sulfur content.

Apparatus: Commercial induction combustion systems with infrared SO2 detectors, pressure regulator, appropriate crucibles and lids (typical crucible dimensions recommended), and trap/filters between furnace and analyser.

Sampling & preparation: Powder, granules or drillings; clean with high‑purity acetone if contaminated with oil; riffling recommended for heterogeneous particle sizes.

Procedure essentials: Instrument stabilization, blank tests and zero adjustment, calibration using CRMs across operating range (bottom, top, quartiles), and routine determination. Typical standby oxygen purification flow ≈ 0,5 l/min; combustion flow ≈ 2,0 l/min; combustion temperatures often exceed 1 700 °C.

Quality controls: Blank limits and acceptance criteria (e.g., blank should be ≤ 0,001 % with low standard deviation for low‑sulfur tests; for sulfur > 0,05 % blank checks must remain below 0,0005 %), and use of CRMs certified by referee methods.

Safety: Warnings about burn risk, oxygen handling, and removal of residual oxygen from apparatus.

Applications / Who uses it

Ferronickel producers and refinery quality control labs for routine sulfur monitoring.

Nickel‑alloy and stainless‑steel manufacturers verifying feedstock sulfur specifications.

Metallurgical testing laboratories performing combustion analysis and instrument calibration.

Procurement and compliance teams requiring reproducible sulfur determinations for contracts and specifications.

This standard is practical for on‑line and laboratory QC because it employs commercially available equipment and CRMs, enabling traceable, repeatable sulfur measurements in production environments.

ISO 7526:2020

Abstract

Похожие стандарты

Overview

Key Topics

Applications / Who uses it

Related Standards

Технические детали

SIST EN ISO 4934:2004

Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003)

SIST EN 24935:1997

Steel and iron - Determination of sulphur content - Infrared absorption method after combustion in an inducti…

ISO 1070:1992/Amd 1:1997

Liquid flow measurement in open channels — Slope-area method — Amendment 1

ISO 1390-2:1977

Maleic anhydride for industrial use — Methods of test — Part 2: Measurement of colour of the molten material