ISO 8037-2:1997

Name: ISO 8037-2:1997 — Optics and optical instruments — Microscopes — Slides — Part 2: Quality of material, standards of finish and mode of packaging
SKU: ISO 8037-2:1997
Price: 27000 RUB
Availability: InStock

Optics and optical instruments — Microscopes — Slides — Part 2: Quality of material, standards of finish and mode of packaging

Название (английский):

ISO 8037-2:1997

Optics and optical instruments — Microscopes — Slides — Part 2: Quality of material, standards of finish and mode of packaging

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 13 ноября 1997 г.
Издание:: ISO IS 8037 edition 1 version 1
ICS:: 37.020

Тип поставки:

Full version27 000 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:27 000 ₽

Описание (английский):

This part of ISO 8037 specifies requirements and test methods for the quality of material, standards of finish and mode of packaging of silicate microscope slides for use in transmitted light microscopy in the visible spectrum range (400 nm to 760 nm).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 8037-2:1997 specifies requirements and test methods for the quality of material, standards of finish and mode of packaging of silicate microscope slides intended for transmitted light microscopy (visible spectrum 400–760 nm). It complements ISO 8037-1 (dimensions, optical properties and marking) by defining acceptability criteria for surface quality, edge finish, chemical durability, packaging and related inspection procedures to ensure safety and reliable performance.

Key topics and technical requirements

Scope and purpose: Applies to silicate microscope slides used in transmitted light microscopy (400–760 nm). Focus on user safety (no cut edges), optical performance and packaging integrity.

Material and surface quality: Slides must be transparent and essentially colourless; permitted slight green edge tint. Tests for cloudiness, haze, pits, seeds, cords, stones, lines, scratches and cracks; observation conditions specified (unaided eye, vision 1.0, diffuse 1500 lux).

Edge finish and safety: All edges and corners must be finished to avoid cutting hazards. Specific limits: chipped corners not to exceed 1 mm × 0.5 mm; separate AQLs for short and long edges.

Flatness and thickness: Maximum non‑flatness: 50 μm (76 mm slides) and 25 μm (46 mm slides). Thickness variation tolerances: 50 μm (76 mm) and 30 μm (46 mm); measurement methods defined.

Surface durability and wettability: Chemical durability tested via solubility tests; wettability and adhesion criteria specified (inspection levels and AQLs).

Frosted ends and marking: If specified, frosting dimensions and pencil/ink marking requirements are described.

Residual stress / birefringence: For polarized‑light use, optical path difference limit of 5 nm when measured through the principal plane.

Sampling and acceptance: Sampling plans reference ISO 2859‑1 (AQLs). Tests are to be performed within six months of packaging; detailed sequence and inspection levels given.

Applications and users

Manufacturers and suppliers of microscope slides use ISO 8037-2 for product specification, quality control and packaging design.

Quality assurance and QC labs apply the test methods and AQLs to perform lot acceptance testing.

Clinical and research laboratories, procurement specialists and instrument manufacturers rely on these standards to ensure slides are safe (no cut edges), optically suitable and properly packaged for transport and storage.

Regulatory and purchasing agreements: referenced in supplier contracts and conformity assessments (ISO 9000 series conformity may affect sampling needs).

Related standards

ISO 8037-1: Dimensions, optical properties and marking

ISO 2859-1: Sampling procedures for inspection by attributes (AQL)

ISO 4287-1: Surface roughness - terminology

ISO 11455: Determination of birefringence

Keywords: ISO 8037-2, microscope slides, silicate slides, quality of material, standards of finish, packaging, transmitted light microscopy, AQL, sampling, edge finish, birefringence, wettability.

ISO 8037-2:1997

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 8037-1:1986

Optics and optical instruments — Microscopes — Slides — Part 1: Dimensions, optical properties and marking

ISO 2859-1:2026

Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality lim…

BS ISO 9000-2:1997

Quality management and quality assurance standards - Generic guidelines for the application of ISO 9001, ISO…

ISO 4287:1997

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface t…

ISO 11455:1995

Raw optical glass — Determination of birefringence