ISO/IEC 10373-8:2011

Name: ISO/IEC 10373-8:2011 — Identification cards — Test methods — Part 8: USB-ICC
SKU: ISO/IEC 10373-8:2011
Price: 25 EUR
Availability: InStock

Identification cards — Test methods — Part 8: USB-ICC

Название (английский):

Identification cards — Test methods — Part 8: USB-ICC

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 33
Дата публикации:: 11 марта 2011 г.
Издание:: ISO/IEC IS 10373 edition 1 version 1
ICS:: 35.240.15

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO/IEC 10373-8:2011 describes a Test Methodology and a list of Test Scenarios to evaluate the compliance of a card with ISO/IEC 7816-12. Specifically, ISO/IEC 10373-8:2011: addresses USB 2.0 physical layer measurements and electrical compliance testing; discusses issues relative to the Test Tools to analyse USB bus traffic and provides guidance for the Test Scenarios given in ISO/IEC 10373-8:2011; proposes a classification of Test Scenarios given in ISO/IEC 10373-8:2011, along with validation criteria; discusses Test Cases for compliance with the USB CCID Class Device.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO/IEC 10373-8:2011 - Identification cards - Test methods - Part 8: USB-ICC specifies a test methodology and a comprehensive set of test scenarios to evaluate USB-based integrated circuit cards (USB-ICC) for conformance with ISO/IEC 7816-12 and the USB 2.0 physical/electrical requirements. The standard guides manufacturers and test laboratories through electrical and protocol-level testing, classification of test scenarios, validation criteria, and CCID-class compliance tests to ensure interoperability and reliable USB behaviour.

Key Topics

Test methodology and validation framework: Structured approach to build a validation plan covering physical/electrical tests, USB protocol execution, and USB class compliance (CCID).

Physical and electrical measurements: Guidance for USB 2.0 physical layer testing including differential signal quality (eye diagram), rise/fall times, in‑rush current, and Vbus drop/droop.

USB data rates and timing: Reference to USB 2.0 data rates and rise times (Low Speed 1.5 Mbit/s, Full Speed 12 Mbit/s, High Speed 480 Mbit/s and corresponding rise-time ranges).

Protocol compliance testing: Test sets for USB signal management, timing, low-level protocol and error recovery, state machine behaviour, and control transfer handling (Setup/Data/Status stages).

Test tools and bus analysis: Discussion of USB protocol analyzers and test tools required to capture and assess USB bus traffic.

CCID (USB Smart Card) class tests: Specific test cases and state diagrams for Control Transfer (Class-specific and Standard requests) to validate CCID compliance and device behaviour during enumeration and normal operation.

Test classification & acceptance criteria: Categories of tests (criticality, targets), plus pass/fail validation criteria to support repeatable certification.

Applications

Who uses ISO/IEC 10373-8:2011 and why:

Card manufacturers - to develop and execute a USB-ICC validation plan that demonstrates compliance with ISO/IEC 7816-12 and USB electrical/protocol requirements.

Test laboratories & certification bodies - to standardize test scenarios, reportable metrics, and acceptance/refusal criteria for USB-ICC devices.

Hardware and firmware engineers - to debug interoperability issues using protocol analyzers and to tune electrical signalling (rise times, chirp, receiver sensitivity for Hi‑Speed).

Integrators and QA teams - to ensure USB-ICC products interoperate reliably with hosts and other USB devices in field deployments.

Practical outcomes include reduced interoperability failures, consistent manufacturing validation, and clear evidence supporting product certification.

Related Standards

ISO/IEC 7816-12:2005 - Integrated circuit cards - USB electrical interface and operating procedures (normative reference).

Universal Serial Bus Specification, Revision 2.0 - USB physical/electrical and protocol baseline (USB-IF).

Other parts of ISO/IEC 10373 (Parts 1–9) for complementary card test methods.

Keywords: ISO/IEC 10373-8:2011, USB-ICC, USB 2.0 compliance, ISO/IEC 7816-12, CCID class, USB protocol analyzer, electrical testing, physical layer measurements, test scenarios, validation criteria.

ISO/IEC 10373-8:2011

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO/IEC 7816-12:2005

Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and…

ISO/IEC 10373-1:2020

Cards and security devices for personal identification — Test methods — Part 1: General characteristics

ISO 8212:1986

Soaps and detergents — Techniques of sampling during manufacture

ISO 20662:2020

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 3021:2023

Adventure tourism — Hiking and trekking activities — Requirements and recommendations

ISO 3826-2:2008

Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…

ISO/IEC 24730-1:2014

Information technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)

ISO 8668-5:1992

Aircraft — Terminal junction systems — Part 5: Detail specification for type 3 system