SIST EN ISO 3452-4:2000

Name: SIST EN ISO 3452-4:2000 — Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998)
SKU: SIST EN ISO 3452-4:2000
Price: 34200 RUB
Availability: InStock

Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998)

Название (английский):

Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 19
Дата публикации:: 1 февраля 2000 г.
ICS:: 19.100
Технический комитет:: PKG - Testing of metallic materials

Тип поставки:

Full version34 200 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:34 200 ₽

Описание (английский):

This European standard specifies the characteristics of equipment used in penetrant testing. The characteristics of equipment required for carrying out penetrant testing depend on the number of tests to be made and on the size of the components to be tested. Two types of equipment are included in this standard: a) equipment suitable for carrying out in situ penetrant testing techniques; b) fixed installations.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 3452-4:1998 - Non-destructive testing - Penetrant testing - Part 4: Equipment (CEN/ISO) specifies the required characteristics of equipment used to perform penetrant testing (PT). The standard covers both portable in situ equipment and fixed installations, and links equipment selection to the number of tests and component sizes. It is intended to ensure safe, effective and reproducible penetrant inspections in industrial quality and maintenance environments.

Key topics and technical requirements

Equipment types

Portable in situ: spray units, brushes, lint‑free cloths, UV-A and white light sources, personal protective equipment (PPE).
Fixed installations: purpose-built tanks, spray booths, conveyors and process stations.

Materials and construction

All plant materials (tanks, pipework, ducting) must resist chemical attack by penetrant and not alter penetrant properties.

Health, safety & environment

Closed storage for chemicals, extraction/ventilation for spray application, effluent treatment or recirculation meeting local discharge requirements, and compliance with local HS&E rules.

Process areas defined

Preparation/precleaning and degreasing (including cooling areas).
Penetrant application (air-assisted, airless, electrostatic, brushing or immersion).
Penetrant drain and excess removal (immersion tanks with agitation or spray-wash).
Emulsifier application (hydrophilic via immersion/flow-on/foam; lipophilic by immersion).
Drying (suction, rotation, warm air ovens - warm air max 80 °C; forced-air ovens for uniform drying).
Developer application (powder: dust‑storm, electrostatic, flock, tumbler, insufflator, fluidized bed; water-suspension tanks; solvent-based spray cabinets; water-soluble immersion tanks).
Inspection: space for movement, non-reflecting surfaces, lighting control.

Inspection lighting

Fluorescent PT: UV‑A lamps meeting prEN ISO 3059; ambient visible light should not exceed 20 lx.
Colour‑contrast PT: white light at not less than 500 lx at the inspection surface.

Operational controls

Spray-wash guns: as low a pressure as practicable, water temperature ≤ 50 °C, and pressure measured near the nozzle.
Tanks fitted with lids and retaining trays; penetrant drain and recovery provisions.

Applications and users

Practical applications: surface defect detection for welded joints, castings, forgings, aerospace components, pressure vessels, maintenance inspections and production quality control.

Primary users: NDT technicians, quality managers, plant and process engineers, equipment manufacturers, and HS&E officers who design, install, operate or audit penetrant testing facilities.

Related standards

EN ISO 3452-1: General principles (PT)

prEN ISO 3452-2: Testing of penetrant materials

EN ISO 3452-3: Reference test blocks

prEN ISO 3059: Viewing and lighting conditions for PT and magnetic particle testing

Keywords: EN ISO 3452-4:1998, penetrant testing equipment, non-destructive testing, NDT equipment, in situ penetrant testing, fixed penetrant installations, UV-A inspection, developer application.

SIST EN ISO 3452-4:2000

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 3452-4:1998

Non-destructive testing — Penetrant testing — Part 4: Equipment

SIST EN ISO 3059:2013

Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012)

SIST EN ISO 3452-1:2021

Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2021)

SIST EN ISO 3452-2:2021

Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2021)

BS EN ISO 3452-3:2013

Non-destructive testing. Penetrant testing. Reference test blocks.