SIST EN ISO 4037-4:2021

Overview

EN ISO 4037-4:2021 (ISO 4037-4:2019) specifies guidelines for the calibration of area and personal dosemeters in low energy X‑ray reference radiation fields (generating potential ≤ 30 kV). It focuses on characterization of low‑energy photon radiations and on procedures to determine dosemeter and dose‑rate meter response as a function of photon energy and angle of incidence. The standard emphasises accurate determination of conversion from air kerma to operational quantities such as Hp(10), *H(10)**, Hp(3) and H'(3) and describes an alternative - direct calibration using appropriate reference instruments.

Key Topics and Requirements

• Field characterization: Guidance on producing and characterising low energy X‑ray reference radiations (spectral fluence, tube potential and spectra).
• Dosimetry: Procedures for dosimetry in low energy reference fields, including stability checks and measurement traceability.
• Calibration methods: Two primary approaches:
  • Using conversion coefficients from air kerma to operational quantities.
  • Direct calibration in terms of operational quantities with reference instruments that measure ICRU dose equivalent quantities.
• Response determination: Measurement of dosemeter response versus photon energy and angle of incidence; requirements for test geometry and phantom use where applicable.
• Uncertainty and corrections: Requirements for statement of uncertainty (target overall uncertainty ~6–10% for phantom‑related operational quantities) and normative guidance such as air density correction (Annex A).
• Documentation: Procedures for reporting conventional quantity values, calibration results and associated uncertainties.

Applications

EN ISO 4037-4 is used to ensure reliable, traceable calibration for:

• Occupational radiation monitoring (personal and area monitoring).
• Calibration laboratories and national metrology institutes that provide accredited calibration services for low energy X fields.
• Quality assurance in fields dominated by low‑energy photons, e.g., diagnostic radiology, dental radiography, some industrial X‑ray inspections and workplace radiation protection.
• Manufacturers of dosemeters and dose‑rate meters to validate device performance across low photon energies and incident angles.

Who Uses This Standard

• Calibration laboratories and accreditation bodies
• National metrology institutes
• Health physics and radiation protection professionals
• Dosemeter and instrument manufacturers
• Regulatory agencies and hospital physicists

Related Standards

EN ISO 4037-4 is part of the ISO 4037 series on photon reference radiation fields and aligns with other parts that cover field production, dosimetry and calibration methods (see ISO 4037‑1, ISO 4037‑2, ISO 4037‑3). It also references ICRU operational quantity definitions and general calibration practice standards.

Keywords: EN ISO 4037-4:2021, ISO 4037-4, radiological protection, low energy X reference radiation, calibration, dosemeters, air kerma, Hp(10), H*(10), Hp(3), H'(3), dosimetry, conversion coefficients.