SIST EN ISO 6508-1:2024

Name: SIST EN ISO 6508-1:2024 — Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)
SKU: SIST EN ISO 6508-1:2024
Price: 68400 RUB
Availability: InStock

Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)

Название (английский):

Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 38
Дата публикации:: 6 марта 2024 г.
Издание:: ISO 6508-1:2023
ICS:: 77.040.10

Тип поставки:

Full version68 400 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:7 раб. дн. (перевод)

Цена:68 400 ₽

Описание (английский):

This document specifies the method for Rockwell regular and Rockwell superficial hardness tests for scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T for metallic materials and is applicable to stationary and portable hardness testing machines. For specific materials and/or products, other specific International Standards apply (e.g. ISO 3738-1 and ISO 4498).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 6508-1:2023 - “Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)” specifies the standardized procedure for performing Rockwell regular and Rockwell superficial hardness tests on metallic materials. Approved by CEN in December 2023, this fifth-edition test method applies to both stationary and portable hardness testing machines and covers Rockwell scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T.

Key Topics

Scope and applicability: Defines test method boundaries and notes that some materials/products may require other standards (e.g., ISO 3738-1, ISO 4498).

Scales, indenters and forces: Specifies Rockwell regular and superficial scales, types of indenters (diamond cone, specified ball diameters) and the associated preliminary and total test forces and scaling constants (tables provided for each scale).

Testing machine and test piece requirements: Requirements for stationary and portable machines, indenter types, specimen preparation and minimum thickness constraints (see Annex B).

Test procedure and reporting: Step-by-step measurement procedure, designation examples (e.g., “70 HR30TW”), and required content of the test report.

Uncertainty and traceability: Guidance on determining measurement uncertainty (Clause 9, Annex G informative) and traceability of hardness measurements (Annex I).

Verification, calibration and inspection: References and normative links to verification/calibration of machines and indenters (ISO 6508-2) and calibration of reference blocks (ISO 6508-3). Includes daily verification procedures (Annex E) and inspection of diamond indenters (Annex F).

Special cases and corrections: Normative annexes cover special thin-product tests (Annex A), thickness limits (Annex B), and corrections for curved surfaces (Annexes C and D).

Applications

Quality control and acceptance testing in metallurgy, heat treatment, fabrication, automotive, aerospace, and general metalworking.

Field and laboratory hardness testing using portable and stationary Rockwell testers.

Material selection, hardness specification compliance, and correlation to mechanical properties where Rockwell hardness is referenced.

Related Standards

ISO 6508-2 - Verification and calibration of testing machines and indenters

ISO 6508-3 - Calibration of reference blocks

Material/product-specific standards: ISO 3738-1, ISO 4498

Keywords: EN ISO 6508-1:2023, Rockwell hardness test, metallic materials, Rockwell scales, hardness testing machine, test method, Rockwell regular, Rockwell superficial.

SIST EN ISO 6508-1:2024

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Who should use this standard

Related Standards

Технические детали

ISO 6508-1:2023

Metallic materials — Rockwell hardness test — Part 1: Test method

SIST EN ISO 3738-1:2010

Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)

SIST EN ISO 4498:2010

Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 44…

SIST EN ISO 6508-2:2024

Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and in…

SIST EN ISO 6508-3:2024

Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)