SIST EN ISO 787-7:2009
General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)
General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 13
- Дата публикации:
- 14 октября 2009 г.
- ICS:
- 87.060.10
- Технический комитет:
- PIP - Pigments and extenders
ISO 787-7:2009 specifies a general method of test for determining the residue on sieve from a sample of pigment or extender dispersed in water.
Abstract
Overview
EN ISO 787-7:2009 - "General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure" - specifies a standardized laboratory procedure for measuring the residue on sieve from a sample of pigment or extender dispersed in water. The method defines sampling, apparatus, dispersion, manual sieving and washing, drying and weighing of the retained fraction, calculation of residue (percent by mass) and mandatory test-report items.
Key topics and technical requirements
- Scope: Applies to pigments and extenders dispersed in water; results can differ from the mechanical flushing procedure (ISO 787-18), so the chosen method must be stated in specifications and reports.
- Sampling: Take a representative sample per ISO 15528.
- Apparatus: metal test sieve (ISO 565) - nominal aperture must be reported (45 µm often used); brush, sintered‑glass crucible (porosity P40 per ISO 4793) or 50 ml beaker; oven at (105 ± 2) °C; balances (up to 1 000 g to 0.1 g and high‑precision to 1 mg); desiccator; washbottle.
- Test portion size: typically 10–100 g; up to 1 000 g for very low-residue products. Duplicate determinations are required.
- Dispersion: Water (300–600 ml) with an agreed dispersing agent (typically 0.2–0.5 % of test mass) or mechanical stirring per ISO 3262‑9 (stirrer speed recommended ≤ (500 ± 50) min−1). The dispersing method and agent must be reported.
- Procedure: Pour dispersion through the sieve, rinse until washings are clear, optionally break agglomerates with a brush, transfer residue to crucible/beaker, dry and weigh. If residue melting point
Технические детали
- SKU
- SIST EN ISO 787-7:2009
Похожие стандарты
Стандарты, упомянутые в описании
ISO 787-7:2009
ДействующийGeneral methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method…
Overview ISO 787-7:2009 defines a manual water method for the determination of residue on sieve from samples of pigments and extenders dispersed in water. The method is part of the ISO 787 series of…
SIST EN ISO 787-18:1997
ДействующийGeneral methods of test for pigments and extenders - Part 18: Determination of residue on sieve - Mechanical…
Overview EN ISO 787-18:1995 (ISO 787-18:1983) specifies a mechanical flushing procedure to determine the residue on a sieve for pigments and extenders dispersed in water. The method measures the coar…
BS EN ISO 15528:2020
ДействующийPaints, varnishes and raw materials for paints and varnishes. Sampling.
ISO 5658-2:2006/Amd 1:2011
ДействующийReaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in verti…
Overview ISO 5658-2:2006/Amd 1:2011 is an important amendment to the international standard outlining methods for reaction to fire tests, specifically focusing on the lateral spread of flame on build…
SIST ISO 4793:1995
ДействующийLaboratory sintered (fritted) filters -- Porosity grading, classification and designation
Overview ISO 4793:1980 defines a standardized system for grading, classifying and designating laboratory sintered (fritted) filters by their porosity. Applicable to filters made of glass, vitreous si…
SIST EN ISO 3262-9:2023
ДействующийExtenders - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:2023)
Overview EN ISO 3262-9:2023 - Extenders: Calcined clay specifies the requirements and corresponding test methods for calcined clay used as an extender (filler). Published by CEN and identical to ISO…