SIST EN ISO 801-1:2000

Name: SIST EN ISO 801-1:2000 — Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 8001-1:1994)
SKU: SIST EN ISO 801-1:2000
Price: 23400 RUB
Availability: InStock

Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 8001-1:1994)

Название (английский):

Pulps - Determination of saleable mass in lots - Part 1: Pulp baled in sheet form (ISO 8001-1:1994)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 1 апреля 2000 г.
ICS:: 85.040
Технический комитет:: VPK - Pulp, paper, board and products

Тип поставки:

Full version23 400 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:23 400 ₽

Описание (английский):

Cancels and replaces the first edition (1979). Specifies a method for determining the dryness of a lot of pulp baled in sheet form and for calculating its saleable mass. Applicable to all kinds of pulp baled in sheet form. Does not apply to pulp baled in lots in slab form or to pulp baled in unitized lots.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты SIST

Overview

EN ISO 801-1:1996 (ISO 801-1:1994) defines a standardized method for determining the saleable mass of pulps baled in sheet form by measuring lot dryness and calculating commercial mass. This part cancels and replaces the first edition (1979) and is applicable to all kinds of pulp delivered in sheet bales. It does not apply to pulps baled in slab form or to unitized bales.

Key topics and technical requirements

Scope and purpose: Specifies sampling, specimen selection, drying and weighing procedures to determine dryness and calculate saleable mass for pulp lots.

Definitions: Important terms include gross mass, oven-dry mass, absolute dryness, air-dry mass, theoretical commercial dryness (commonly 88% or 90%) and saleable mass.

Sampling plan: Sample bales are selected using a sliding-scale sampling table based on lot size. Samples must be representative and the total number of sample bales is a multiple of six. Groups of six bales are formed for testing.

Specimen selection and cutting: From each sample bale, five specimen sheets are taken at defined positions. Test pieces are cut as triangular sections using one of two accepted alternatives:

Constant area pieces, or
Constant apex angle (24°) pieces.

Weighing and drying: Test pieces are stored to prevent moisture change, then dried in a ventilated oven at 105 °C ± 2 °C until constant mass is reached. Balances and scales with specified accuracies (e.g., scale accuracy ~1/1 000; laboratory balance sensitivity ~0.1 g and capacity ≥5 kg) are required.

Calculation: Absolute dryness = oven-dry mass / initial mass. Saleable mass = gross mass × (absolute dryness / theoretical commercial dryness). Annex A provides a sample certificate and worked calculations; Annex B describes marking equipment for specimen positions.

Applications and who uses it

Pulp producers - to issue certified saleable mass on shipping documents and invoices.

Buyers and traders - to verify delivered mass and moisture basis for commercial transactions.

Quality control and testing laboratories - to perform standardized dryness and mass determinations for compliance and dispute resolution.

Logistics, warehousing and customs - to ensure consistent mass declarations for storage, transport and regulatory reporting.

Using EN ISO 801-1 helps ensure transparent, repeatable measurement of pulp mass on a commercial dryness basis, reducing disputes and facilitating international trade.

Related standards

ISO 801 (other parts):

Part 2 - pulps baled in slabs (e.g., flash-dried pulp)
Part 3 - unitized bales

Developed by ISO/TC 6 (Paper, board and pulps), Subcommittee SC 5 (Test methods and quality specifications for pulp).

Keywords: EN ISO 801-1:1996, ISO 801-1, pulp baled in sheet form, saleable mass, oven-dry mass, absolute dryness, sampling, pulp testing.

SIST EN ISO 801-1:2000

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

ISO 801-1:1994

Pulps — Determination of saleable mass in lots — Part 1: Pulp baled in sheet form

SIST EN ISO 8015:2012

Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)

SIST EN ISO 6338:2026

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

SIST-TP CEN ISO/ASTM TR 52958:2026

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

SIST EN ISO 41002:2026

Facility management - Development of the facility management organization (ISO 41002:2026)

SIST EN ISO 844:2026

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

SIST-TS CEN ISO/TS 17664-3:2026

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

SIST EN ISO 8980-4:2026

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…