SIST EN ISO 801-3:1997

Name: SIST EN ISO 801-3:1997 — Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994)
SKU: SIST EN ISO 801-3:1997
Price: 23400 RUB
Availability: InStock

Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994)

Название (английский):

Pulps - Determination of saleable mass in lots - Part 3: Unitized bales (ISO 801-3:1994)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 1 сентября 1997 г.
ICS:: 85.040
Технический комитет:: VPK - Pulp, paper, board and products

Тип поставки:

Full version23 400 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:23 400 ₽

Описание (английский):

Specifies a method for determining the dryness of a lot of pulp baled in sheet form and shipped as unitized bales, and for calculating its saleable mass. Applicable to all kinds of this pulp. Does not apply to pulp baled in lots in slab form or to pulp shipped as single bales. An example of a full certificate of analysis and related calculations is given in annex A. Annex B gives details of equipment for marking the position of specimen sheets in sample bales.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты SIST

Overview

EN ISO 801-3:1996 (ISO 801-3:1994) specifies a standardized method for determining the saleable mass of pulp lots baled in sheet form and shipped as unitized bales. The standard defines how to sample unitized bale lots, measure bale gross mass and specimen moisture, calculate absolute dryness and derive the saleable mass for invoicing and quality certification. It applies to all kinds of pulp baled in sheet form shipped as unitized bales, but explicitly does not apply to pulps baled in slab form or to single bales.

Key topics and technical requirements

Scope and definitions: clear definitions for lot, unit, bale, gross mass, oven-dry mass, absolute dryness, air-dry mass, theoretical commercial dryness and saleable mass.

Sampling procedure: selection of representative sample units from across the lot; minimum sampling fractions tied to lot size; specimen sheets drawn from each sample bale at fixed intervals across bale thickness.

Specimen preparation: cutting five triangular test pieces per specimen sheet with a constant apex angle (18°) and specific positioning rules to ensure representative sampling across the bale.

Weighing and drying:

Bale gross mass measured to at least 1/1 000 accuracy.
Test-piece weighing to at least 1/5 000 accuracy (balance capacity ≥ 5 kg, sensitivity 0.1 g).
Drying in a ventilated oven at 105 °C ± 2 °C to constant mass.

Calculations: saleable mass is calculated from gross mass and absolute dryness using the theoretical commercial dryness (commonly 88% or 90%). Formula: saleable mass = gross mass × (absolute dryness / theoretical commercial dryness).

Documentation and annexes:

Annex A: example of a full certificate of analysis and related calculations.
Annex B: equipment details for marking specimen positions in sample bales.

Applications and who uses it

Practical for pulp producers, buyers, inspectors, trading houses, port authorities and QA laboratories involved in commercial pulp transactions.

Used to:

Standardize invoicing by converting gross bale weights to saleable mass.
Verify moisture content and quality for trade disputes, acceptance testing and contract compliance.
Produce consistent certificates of analysis for export/import documentation.

Particularly relevant to supply-chain and laboratory personnel responsible for pulp testing, lot inspection and mass/moisture reporting.

Related standards

EN ISO 801 series (other parts address pulp baled in sheet form, pulps baled in slabs, and related sampling methods).

Refer to ISO/TC 6 (Paper, board and pulps) publications for broader test-method context.

Keywords: EN ISO 801-3, ISO 801-3, pulps, unitized bales, saleable mass, dryness determination, sampling, oven-dry mass, certificate of analysis.

SIST EN ISO 801-3:1997

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

ISO 801-3:1994

Pulps — Determination of saleable mass in lots — Part 3: Unitized bales

SIST EN ISO 8015:2012

Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)

SIST EN ISO 6338:2026

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

SIST-TP CEN ISO/ASTM TR 52958:2026

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

SIST EN ISO 41002:2026

Facility management - Development of the facility management organization (ISO 41002:2026)

SIST EN ISO 844:2026

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

SIST-TS CEN ISO/TS 17664-3:2026

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

SIST EN ISO 8980-4:2026

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…