SIST ISO 3310-2:2015

Name: SIST ISO 3310-2:2015 — Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate
SKU: SIST ISO 3310-2:2015
Price: 25200 RUB
Availability: InStock

Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate

Название (английский):

Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 20 января 2015 г.
ICS:: 19.120
Технический комитет:: I12 - Imaginarni 12 Imaginarni TC za ISO področje - vzdrževani privzeti ISO standardi

Тип поставки:

Full version25 200 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:25 200 ₽

Описание (английский):

ISO 3310-2:2013 specifies the technical requirements and corresponding test methods for test sieves of perforated metal plate. It applies to test sieves having round holes, with sizes from 125 mm down to 1 mm, or square holes, with sizes from 125 mm down to 4 mm, in accordance with ISO 565.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 3310-2:2013 (Test sieves of perforated metal plate)

ISO 3310-2:2013 specifies the technical requirements and test methods for test sieves manufactured from perforated metal plate. It covers sieves with round holes (125 mm to 1 mm) and square holes (125 mm to 4 mm) in accordance with ISO 565. The standard ensures dimensional accuracy of sieve openings so that particle size analysis and sieving results are reproducible and traceable.

Key topics and technical requirements

Scope and designation

Nominal hole size (mm) and shape (round or square) define sieve designation.

Hole size tolerances and pitch

Tolerances on individual hole sizes and preferred pitches are specified (see Table 1). Pitches have a permissible range to allow practical manufacturability while maintaining sieving accuracy.

Plate thickness and materials

Preferred nominal thicknesses and permissible ranges are given (Table 2). Typical materials: plated steel or brass; purchasers can specify stainless steel.

Hole arrangement and geometry

Holes may be in straight or staggered rows; square-hole corners may have limited rounding. Sieves ≥4 mm require an unperforated margin; partial holes are not permitted.

Inspection and test methods

Mandatory tests include a visual inspection and measured verification of individual hole sizes and pitch. Measurement precision requirements (e.g., reading precision of 20 µm or 1/4 of the applicable tolerance) are specified.

Documentation, certification and record keeping

Manufacturers may supply a test sieve record card and certificates: compliance, inspection (average hole size), and calibration (detailed measurement results).

Frames and marking

Recommendations for frame sizes (200 mm typical), nesting, sealing to prevent sample loss, and required marking (nominal size/shape, material, standard reference, manufacturer, serial number).

Practical applications and who uses ISO 3310-2

Particle size analysis and quality control in industries such as minerals, aggregates, pharmaceuticals, food, and chemicals.

Testing and calibration laboratories that need traceable sieve specifications and calibration records.

Sieve manufacturers and suppliers for production tolerances, documentation, and conformity certificates.

Procurement and QA teams who require specified sieve performance for standard test methods. Using ISO 3310-2 helps ensure consistent sieving performance, repeatable test results, and compliance with international best practice.

Related standards

ISO 3310-1 - Test sieves of metal wire cloth

ISO 3310-3 - Test sieves of electroformed sheets

ISO 565 - Nominal sizes of openings (metal wire cloth, perforated plate, electroformed sheet)

ISO 2395 - Test sieves - Vocabulary

ISO 2591-1 - Influence of sieve frame and sieving procedures on results

Keywords: ISO 3310-2, test sieves, perforated metal plate, particle size analysis, sieve calibration, hole size tolerances, sieving standards.

SIST ISO 3310-2:2015

Abstract

Похожие стандарты

Overview - ISO 3310-2:2013 (Test sieves of perforated metal plate)

Key topics and technical requirements

Practical applications and who uses ISO 3310-2

Related standards

Технические детали

ISO 3310-2:2013

Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate

ISO 5658-2:2006/Amd 1:2011

Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in verti…

BS ISO 3310-1:2016

Test sieves. Technical requirements and testing. Test sieves of metal wire cloth.

SIST ISO 3310-3:2000

Test sieves -- Technical requirements and testing -- Part 3: Test sieves of electroformed sheets

SIST EN ISO 23953-1:2024

Refrigerated display cabinets - Part 1: Vocabulary (ISO 23953-1:2023)

SIST ISO 2591-1:2000

Test sieving -- Part 1: Methods using test sieves of woven wire cloth and perforated metal plate