SIST ISO 3547-6:2020

Name: SIST ISO 3547-6:2020 — Plain bearings - Wrapped bushes - Part 6: Checking the inside diameter
SKU: SIST ISO 3547-6:2020
Price: 19800 RUB
Availability: InStock

Plain bearings - Wrapped bushes - Part 6: Checking the inside diameter

Название (английский):

Plain bearings - Wrapped bushes - Part 6: Checking the inside diameter

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 28 сентября 2020 г.
ICS:: 21.100.10
Технический комитет:: ISEL - Mechanical elements

Тип поставки:

Full version19 800 ₽Read online 24h1 200 ₽Read online 72h1 800 ₽

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:19 800 ₽

Описание (английский):

The document specifies, following ISO 12301, the checking of the inside diameter of wrapped bushes (see ISO 3547‑2:2017, method C) and describes the necessary checking methods and measuring equipment. NOTE 1 All dimensions in this document are given in millimetres except where otherwise noted/designated. NOTE 2 The dimensions and tolerances of wrapped bushes are given in ISO 3547‑1. NOTE 3 Checking of the wall thickness is the subject of ISO 3547‑7. NOTE 4 Checking of the outside diameter of wrapped bushes is the subject of ISO 3547‑5.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 3547-6:2020 - Plain bearings - Wrapped bushes - Part 6: Checking the inside diameter - specifies accepted methods and measuring equipment for checking the inside diameter of wrapped bushes. Following ISO 12301 and referring to ISO 3547-2 (method C), this standard explains how to transform a flexible free bush into a measurable condition (by pressing it into a ring gauge) and how to determine the inside diameter using mechanical gauges or measuring instruments. All dimensions are given in millimetres unless otherwise noted.

Key topics and requirements

Purpose: Because wrapped bushes are flexible, the free diameter is not measured directly; the bush is pressed into a ring gauge whose nominal diameter corresponds to the housing bore (typically H7 tolerance).

Measuring methods:

Three-point measuring instrument (radial measurement using spherical pin faces).
GO / NO-GO plug gauges: GO plug should insert with minimum effort; NO-GO must not insert under a maximum force (standard default 250 N, but the limit may be agreed between supplier and user).
Alternative methods (subject to correlation): cylindrical gauges, dial gauges, optical devices.

Test equipment:

Ring gauge and plug gauge dimensions and wear limits specified (see standard tables).
Gauges must be made from hardened, non-ageing steel (60–64 HRC).

Measurement considerations and error sources:

Damage/wear to ring or plug gauges, lack of lead-in chamfer, misalignment during insertion, insufficient ring width, contaminants (grease, burrs), and swelling of parts.

Agreement between supplier and user:

Decide whether results are recorded by measuring or by gauging, and agree on any force limits, special dimensions (for D > 180 mm), or deviations from default gauges.

Applications and users

Quality engineers and inspection technicians in bearing and bush manufacturing.

Metrology and QA teams in automotive, industrial machinery, hydraulic and pivot applications where wrapped bushes are used.

Suppliers and purchasers negotiating inspection protocols and acceptance criteria.

Practical benefits:

Ensures consistent, reproducible inside-diameter checks across suppliers and users.

Reduces measurement disputes by defining gauges, wear limits and common error sources.

Integrates with plant quality-control procedures (ISO 12301) for geometrical inspection.

Related standards

ISO 3547-1:2018 - Dimensions of wrapped bushes

ISO 3547-2:2017 - Test data for outside and inside diameters (method C referenced)

ISO 3547-5 - Checking the outside diameter

ISO 3547-7 - Measurement of wall thickness of thin-walled bushes

ISO 12301 - Quality control techniques for plain bearings

Keywords: ISO 3547-6:2020, plain bearings, wrapped bushes, inside diameter checking, ring gauge, plug gauge, three-point measuring instrument, GO NO-GO, H7 tolerance, inspection procedure.

SIST ISO 3547-6:2020

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

ISO 3547-6:2020

Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter

ISO 3547-1:2018

Plain bearings — Wrapped bushes — Part 1: Dimensions

ISO 3547-2:2017

Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters

SIST ISO 12301:2008

Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics

ISO 3547-2:2006

Plain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters

SIST ISO 3547-5:2021

Plain bearings - Wrapped bushes - Part 5: Checking the outside diameter

SIST ISO 3547-7:2021

Plain bearings - Wrapped bushes - Part 7: Measurement of wall thickness of thin-walled bushes