CEN ISO/TR 22007-5:2014 PDF

Name: CEN ISO/TR 22007-5:2014 — Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)
SKU: CEN ISO/TR 22007-5:2014
Price: 96.97 EUR
Availability: InStock

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)

Название (английский):

CEN ISO/TR 22007-5:2014

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 43
Дата публикации:: 9 июля 2014 г.
Издание:: CEN TR 22007 edition 1 version 1
ICS:: 83.080.01

Тип поставки:

Full version645 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:8 раб. дн. (перевод)

Цена:645 €

Описание (английский):

ISO/TR 22007-5:2011 presents the results of interlaboratory testing for the determination of thermal conductivity and thermal diffusivity of two poly(methyl methacrylate) (PMMA) materials by means of the transient and the modulated methods presented in ISO 22007 parts 2 to 4 and additional transient and steady state methods.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

CEN ISO/TR 22007-5:2014 (ISO/TR 22007-5:2011) documents the results of an interlaboratory comparison for measuring thermal conductivity and thermal diffusivity of two poly(methyl methacrylate) (PMMA) materials. The Technical Report compiles measurement data from multiple laboratories using transient, modulated and steady‑state methods described in ISO 22007 parts 1–4 and other established techniques. Its purpose is to inform the development and application of ISO 22007 test methods and to highlight practical measurement issues, uncertainty and repeatability for polymer thermal-property testing.

Key topics and technical requirements

Materials tested: two PMMA grades (cast and extruded) supplied as sheets (≈2 mm and ≈3 mm) and pellets (extrusion grade).

Measurement methods covered:

Transient plane heat source (Hot Disk)
Temperature wave analysis (modulated methods)
Laser flash method
Transient line source (probe) and guarded heat flow meter (steady‑state)

Specimen preparation: guidance on thickness, cutting/stacking, surface coatings (e.g., graphite or sputtered layers for laser flash) and method‑dependent specimen dimensions.

Data analysis & calculations: procedures to derive λ (thermal conductivity), α (thermal diffusivity) and volumetric heat capacity (ρCp) from measured data.

Uncertainty and repeatability: expanded uncertainties calculated per the Guide to the Expression of Uncertainty in Measurement (GUM); results typically within ±10% of the mean for both λ and α.

Key measurement issues identified:

Adequate specimen thickness for each method
Sample anisotropy and its influence on apparent bulk vs. directional properties
Sensitivity of calculated values to specific heat capacity and density inputs

Applications and who uses this standard

Thermal characterization labs validating or comparing methods for polymers.

Materials scientists and R&D teams evaluating PMMA thermal performance for optical, electronic or thermal management applications.

Polymer manufacturers and quality control teams using standardized methods to report thermal properties.

Standards developers and accreditation bodies using interlaboratory data to refine test protocols and uncertainty statements. Practical uses include material selection, thermal modeling, component design and compliance testing where accurate polymer thermal properties are required.

Related standards

ISO 22007-1: General principles (series lead)

ISO 22007-2: Hot Disk (transient plane heat source)

ISO 22007-3: Temperature wave analysis

ISO 22007-4: Laser flash method

ISO 472: Plastics - Vocabulary

ASTM D5930 (line source probe) and ASTM E1530 (guarded heat flow meter)

GUM: Guide to the Expression of Uncertainty in Measurement

Keywords: thermal conductivity, thermal diffusivity, PMMA, ISO 22007-5, interlaboratory testing, Hot Disk, laser flash, temperature wave analysis, heat flow meter, uncertainty, repeatability.

CEN ISO/TR 22007-5:2014 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses this standard

Related standards

Технические детали

SIST EN ISO 22007-1:2024

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22…

SIST EN ISO 22007-2:2022

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat sourc…

SIST EN ISO 22007-3:2012

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis…

SIST EN ISO 22007-4:2024

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO 22…

ISO 472:2013/Amd 1:2018

Plastics — Vocabulary — Amendment 1: Additional items