EN ISO 10776:2012 PDF

Name: EN ISO 10776:2012 — Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012)
SKU: EN ISO 10776:2012
Price: 60.09 EUR
Availability: InStock

Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012)

Название (английский):

EN ISO 10776:2012

Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 16
Дата публикации:: 15 августа 2012 г.
Издание:: CEN EN 10776 edition 1 version 1
ICS:: 59.080.70

Тип поставки:

Full version240 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:240 €

Описание (английский):

ISO 10776:2012 describes a method for determining the water permeability characteristics of geotextiles or geotextile-related products normal to the plane when subjected to specific normal compressive loads.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 10776:2012 - Geotextiles and geotextile-related products: Determination of water permeability characteristics normal to the plane, under load - specifies a laboratory method to measure the water permeability (flow normal to the plane) of geotextiles and related products while subjected to defined normal compressive stresses. The method quantifies how water flows through a geotextile thickness under realistic loading, delivering parameters used for drainage, filtration and hydraulic design in geotechnical engineering.

Key topics and technical requirements

Test principle: Measure water flow velocity normal to the plane under a constant head (nominally 50 mm) and under compressive stresses of 2, 20 and 200 kPa. Results are expressed as flow velocity vN50/σ (m/s) at 50 mm head and specified stress.

Specimens: Typically five test specimens, handled flat, clean and undamaged; sampling and preparation follow ISO 9862.

Apparatus:

Cylindrical cell with internal diameter 95 mm ± 2 mm and matched upper/lower porous metallic plates.
Porous plates: thickness ≥ 15 mm, perforations 2.5 mm ± 0.2 mm, uniform pattern; specimen flow area ≥ 85% of internal diameter.
Loading ring and mechanism able to impose and maintain 2, 20 and 200 kPa (±5%).
Ability to maintain a 50 mm head loss and avoid edge leakage or deformation that would affect flow.

Water quality & conditioning:

Water temperature 18–22 °C; oxygen ≤ 10 mg/kg; de-aired or from a stilling tank to avoid entrapped air.
Specimens pre-saturated in water with 0.1% (v/v) aryl alkyl sodium sulfonate and left for at least 12 hours.

Measurements & instruments: dissolved-oxygen meter (ISO 5813), stopwatch (0.1 s), thermometer (±0.2 °C), volume measurement with defined accuracy, head-measurement accuracy ~3%.

Procedure controls: seating stress, leak checks, head equilibration within 5 minutes, steady-state flow measurement and collection of permeate for flow calculation.

Statistics & reporting: guidance for specimen number when confidence intervals are required (ISO 2854) and required test-report information.

Applications and users

Who uses it: geosynthetic manufacturers, independent testing laboratories, geotechnical and civil engineers, quality assurance and procurement teams specifying drainage/filtration performance.

Practical uses:

Designing drainage layers, filter interfaces and vertical drains where through-thickness flow under load is critical.
Verifying product conformity for specifications that require permeability under realistic overburden stresses.
Comparative product selection and performance-based procurement for infrastructure, landfill liners, road and railway substructures.

Related standards

ISO 9862 - Sampling and preparation of geosynthetic specimens

ISO 10318 - Geosynthetics terms and definitions

ISO 10320 - Identification on site for geotextiles

ISO 2854 - Statistical interpretation of data

ISO 5813 - Dissolved oxygen measurement

Keywords: EN ISO 10776:2012, geotextiles, water permeability, permeability normal to plane, geosynthetics, compressive load testing, flow velocity, laboratory method.

EN ISO 10776:2012 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 10776:2012

Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to t…

SIST EN ISO 9862:2024

Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2023)

SIST EN 25813:1996

Water quality - Determination of dissolved oxygen - Iodometric method (ISO 5813:1983)

SIST ISO 28540:2012

Water quality - Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water - Method using gas chroma…

ISO 10318-2:2015/Amd 1:2018

Geosynthetics — Part 2: Symbols and pictograms — Amendment 1

SIST EN ISO 10320:2019

Geosynthetics - Identification on site (ISO 10320:2019)